AT24C16C-MAHM-E (UDFN-8(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT24C16C-MAHM-E

MICROCHIPUDFN-8(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT24C16C-MAHM-E (UDFN-8(2x3))1NC2NC3NC4GND5SDA9GND8Vcc7WP6SCLGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4GNDGNDGround Reference Pin (GND)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7WPI/OMultiplexed I/O & Peripheral Pin WP (General)
8VccPowerPower Supply Input (Vcc — 1.7V to 5.5V)
9GNDGNDGround Reference Pin (GND)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: Signal terminal NC (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT24C16C-MAHM-E (UDFN-8(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT24C16C-MAHM-E (UDFN-8(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT24C16C-MAHM-E (UDFN-8(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT24C16C-MAHM-E (UDFN-8(2x3)) - 4. Package Dimensions (D×E×A)
UDFN-8(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT24C16C-MAHM-E (UDFN-8(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT24C16C-MAHM-E (UDFN-8(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for AT24C16C
P1 · p01_fig01456×280px
AT24C16C-MAHM-E (UDFN-8(2x3)) — I²C-Compatible (2-Wire) Serial EEPROM 16-Kbit (2,048 x 8)
I²C-Compatible (2-Wire) Serial EEPROM 16-Kbit (2,048 x 8)
P26 · p26_fig011790×2634px
AT24C16C-MAHM-E (UDFN-8(2x3)) — © 2018 Microchip Technology Inc. Datasheet DS20006051A-page 26
© 2018 Microchip Technology Inc. Datasheet DS20006051A-page 26
P27 · p27_fig011785×2643px
AT24C16C-MAHM-E (UDFN-8(2x3)) — © 2018 Microchip Technology Inc. Datasheet DS20006051A-page 27
© 2018 Microchip Technology Inc. Datasheet DS20006051A-page 27
P27 · p27_fig01P27
AT24C16C-MAHM-E (UDFN-8(2x3)) — Datasheet Page 27 (p27_fig01)
Datasheet Page 27 (p27_fig01)
P28 · p28_fig011785×2640px
AT24C16C-MAHM-E (UDFN-8(2x3)) — © 2018 Microchip Technology Inc. Datasheet DS20006051A-page 28
© 2018 Microchip Technology Inc. Datasheet DS20006051A-page 28
P28 · p28_fig01P28
AT24C16C-MAHM-E (UDFN-8(2x3)) — Datasheet Page 28 (p28_fig01)
Datasheet Page 28 (p28_fig01)
P34 · p34_fig011045×1111px
AT24C16C-MAHM-E (UDFN-8(2x3)) — MILLIMETERS
MILLIMETERS

Technical Specifications & Part Details (AT24C16C-MAHM-E)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT24C16C-MAHM-E (UDFN-8(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.7V to 5.5V supply operation across -40°C to +85°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.85 mm (A1=0.05 mm)
Package family: DFN (UDFN-8(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.30×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UDFN-8(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UDFN-8(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT24C16C-MAHM-E (UDFN-8(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT24C16C-MAHM-E (UDFN-8(2x3))?

Manufactured by MICROCHIP, the AT24C16C-MAHM-E is housed in a UDFN-8(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.7V to 5.5V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for AT24C16C-MAHM-E?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT24C16C-MAHM-E (UDFN-8(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.30 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT24C16C-MAHM-E?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT24C16C-MAHM-E (MICROCHIP, UDFN-8(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & AT24C16C Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2NCNCSignal terminal NC (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7WPDigital_IOSignal terminal WP (I/O, 1.7V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
8VccPower_InPrimary positive power supply input (Vcc) operating in the 1.7V to 5.5V domain (Max rating: 5.5V).
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.