25LC080DT-E/MNY (TDFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

25LC080DT-E/MNY

MICROCHIPTDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 25LC080DT-E/MNY (TDFN-8-EP(2x3))1CS2SO3WP4VSS5SI9EP8VCC7HOLD6SCKGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CSI/OMultiplexed I/O & Peripheral Pin CS (General)
2SOI/OMultiplexed I/O & Peripheral Pin SO (General)
3WPI/OMultiplexed I/O & Peripheral Pin WP (General)
4VSSGNDGround Reference Pin (VSS)
5SII/OMultiplexed I/O & Peripheral Pin SI (General)
6SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
7HOLDI/OMultiplexed I/O & Peripheral Pin HOLD (General)
8VCCPowerPower Supply Input (VCC — 2.5V-5.5V)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 CS
I/O
Multiplexed I/O & Peripheral Pin CS (General)
Design note: Chip Select Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
25LC080DT-E/MNY (TDFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
25LC080DT-E/MNY (TDFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
25LC080DT-E/MNY (TDFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
25LC080DT-E/MNY (TDFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
TDFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
25LC080DT-E/MNY (TDFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
25LC080DT-E/MNY (TDFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for 25LC080DT / 25LC080CT / 25LC080D
P1 · p01_fig01376×200px
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — 8K-256K SPI Serial EEPROM High-Temp Family Data Sheet
8K-256K SPI Serial EEPROM High-Temp Family Data Sheet
P1 · p01_fig02867×685px
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — Name Function
Name Function
P16 · p16_fig011777×2258px
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — DS20002131E-page 16  2009-2021 Microchip Technology Inc. | Note: For very small packages with no room for the RoHS compliant JEDEC designator , the marking will only appear on the outer carton or reel label. | 8-Lead SOIC | XXXXYYWW XXXXXX
DS20002131E-page 16  2009-2021 Microchip Technology Inc. | Note: For very small packages with no room for the RoHS compliant JEDEC designator , the marking will only appear on the outer carton or reel label. | 8-Lead SOIC | XXXXYYWW XXXXXX
P16 · p16_fig01P16
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
P18 · p18_fig011273×1456px
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
P19 · p19_fig01956×878px
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P19 · p19_fig01P19
25LC080DT-E/MNY (TDFN-8-EP(2x3)) — Datasheet Page 19 (p19_fig01)
Datasheet Page 19 (p19_fig01)

Technical Specifications & Part Details (25LC080DT-E/MNY)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:25LC080DT-E/MNY (TDFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.5V-5.5V supply operation across -40°C to +150°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V-5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
5 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (TDFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — 25LC080DT / 25LC080CT / 25LC080D (4)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TDFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 25LC080DT-E/MNY (TDFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 25LC080DT-E/MNY (TDFN-8-EP(2x3))?

Manufactured by MICROCHIP, the 25LC080DT-E/MNY is housed in a TDFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.5V-5.5V. Key pins include: 1 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 2 (SO: Multiplexed I/O & Peripheral Pin SO (General)), 3 (WP: Multiplexed I/O & Peripheral Pin WP (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (SI: Multiplexed I/O & Peripheral Pin SI (General)), 6 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)).

What are the IPC-7351B PCB Footprint dimensions for 25LC080DT-E/MNY?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 25LC080DT-E/MNY (TDFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 25LC080DT-E/MNY?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 25LC080DT-E/MNY (MICROCHIP, TDFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & 25LC080DT / 25LC080CT / 25LC080D Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CSDigital_IOSignal terminal CS (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
2SODigital_IOSignal terminal SO (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
3WPDigital_IOSignal terminal WP (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5SIDigital_IOSignal terminal SI (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
6SCKDigital_IOSignal terminal SCK (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
7HOLDDigital_IOSignal terminal HOLD (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: HOLD. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 2.5V-5.5V domain (Max rating: 5.5V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.