ATSAML10D15A-YF (SSOP-24-208mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATSAML10D15A-YF

MICROCHIPSSOP-24-208mil · 24 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATSAML10D15A-YF (SSOP-24-208mil)124-pin2VDDIO3PA30/SWCLK4PA31/SWDIO5PA00/XIN326PA01/XOUT327PA028PA039PA0410PA0511VDDANA12GNDANA24GND23VDDCORE22RESET#21PA2320PA2219PA1918PA1817PA1716PA1615PA15/XOUT14PA14/XOSC13PA08Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324E=5.30mm · Pitch e=0.65mmD=8.20mm-6-5-4-3-2-101234566543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 5.30mm × 8.20mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (24/24)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
124-pinI/OMultiplexed I/O & Peripheral Pin 24-pin (General)
2VDDIOPowerPower Supply Input (VDDIO — 1.62V to 3.63V)
3PA30/SWCLKI/OMultiplexed I/O & Peripheral Pin PA30/SWCLK (SWD/JTAG)
4PA31/SWDIOI/OMultiplexed I/O & Peripheral Pin PA31/SWDIO (SWD/JTAG)
5PA00/XIN32I/OMultiplexed I/O & Peripheral Pin PA00/XIN32 (RTC/CLK)
6PA01/XOUT32I/OMultiplexed I/O & Peripheral Pin PA01/XOUT32 (RTC/CLK)
7PA02I/OMultiplexed I/O & Peripheral Pin PA02 (General)
8PA03I/OMultiplexed I/O & Peripheral Pin PA03 (General)
9PA04I/OMultiplexed I/O & Peripheral Pin PA04 (General)
10PA05I/OMultiplexed I/O & Peripheral Pin PA05 (General)
11VDDANAPowerPower Supply Input (VDDANA — 1.62V to 3.63V)
12GNDANAGNDGround Reference Pin (GNDANA)
13PA08I/OMultiplexed I/O & Peripheral Pin PA08 (General)
14PA14/XOSCI/OMultiplexed I/O & Peripheral Pin PA14/XOSC (RTC/CLK)
15PA15/XOUTI/OMultiplexed I/O & Peripheral Pin PA15/XOUT (RTC/CLK)
16PA16I/OMultiplexed I/O & Peripheral Pin PA16 (General)
17PA17I/OMultiplexed I/O & Peripheral Pin PA17 (General)
18PA18I/OMultiplexed I/O & Peripheral Pin PA18 (General)
19PA19I/OMultiplexed I/O & Peripheral Pin PA19 (General)
20PA22I/OMultiplexed I/O & Peripheral Pin PA22 (General)
21PA23I/OMultiplexed I/O & Peripheral Pin PA23 (General)
22RESET#ISystem Enable & Hardware Reset (RESET#)
23VDDCOREPowerPower Supply Input (VDDCORE — 1.62V to 3.63V)
24GNDGNDGround Reference Pin (GND)
PIN 1 24-pin
I/O
Multiplexed I/O & Peripheral Pin 24-pin (General)
Design note: Signal terminal 24-pin (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: 24-pin. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 19 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATSAML10D15A-YF (SSOP-24-208mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATSAML10D15A-YF (SSOP-24-208mil) - 2. Standard Pinout (Top View)
True package pinout (24 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATSAML10D15A-YF (SSOP-24-208mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATSAML10D15A-YF (SSOP-24-208mil) - 4. Package Dimensions (D×E×A)
SSOP-24-208mil · 5.30×8.20mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATSAML10D15A-YF (SSOP-24-208mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (24 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATSAML10D15A-YF (SSOP-24-208mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (19 figures · Page 1/2)
Showing 1–12 of 19 uncropped original figures for ATSAML10D15A / ATSAML11E16A
P20 · p20_fig01EXACT PACKAGE
ATSAML10D15A-YF (SSOP-24-208mil) — ...........continued | Pin Pin Name | Supply A B(1) C(2)(3) D(2)(3) E G H I Reset State | SSOP24 VQFN24 WLCSP3 2 | TQFP32/ VQFN32 | EIC REF ADC AC PTC DAC OPAMP SERCOM SERCOM ALTERN ATIVE | TC RTC/ Debug | AC/ GCLK | CCL | 12 9 C6 10 GNDANA
...........continued | Pin Pin Name | Supply A B(1) C(2)(3) D(2)(3) E G H I Reset State | SSOP24 VQFN24 WLCSP3 2 | TQFP32/ VQFN32 | EIC REF ADC AC PTC DAC OPAMP SERCOM SERCOM ALTERN ATIVE | TC RTC/ Debug | AC/ GCLK | CCL | 12 9 C6 10 GNDANA
P1 · p01_fig01456×280px
ATSAML10D15A-YF (SSOP-24-208mil) — Ultra Low-Power, 32-bit Cortex-M23 MCUs with TrustZone, Crypto, and Enhanced PTC
Ultra Low-Power, 32-bit Cortex-M23 MCUs with TrustZone, Crypto, and Enhanced PTC
P567 · p567_fig011478×828px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 32-4. I/O configuration - Standard Input
Figure 32-4. I/O configuration - Standard Input
P567 · p567_fig02871×755px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 32-4. I/O configuration - Standard Input
Figure 32-4. I/O configuration - Standard Input
P1092 · p1092_fig011775×1332px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 51-4. External Analog Reference Schematic With One Reference
Figure 51-4. External Analog Reference Schematic With One Reference
P1092 · p1092_fig01P1092
ATSAML10D15A-YF (SSOP-24-208mil) — Datasheet Page 1092 (p1092_fig01)
Datasheet Page 1092 (p1092_fig01)
P1093 · p1093_fig01957×912px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 51-5. External Reset Circuit Schematic
Figure 51-5. External Reset Circuit Schematic
P1093 · p1093_fig02957×912px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 51-6. External Reset Circuit Schematic (EFT Immunity Enhancement)
Figure 51-6. External Reset Circuit Schematic (EFT Immunity Enhancement)
P1094 · p1094_fig011775×734px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 51-7. External Clock Source Schematic
Figure 51-7. External Clock Source Schematic
P1096 · p1096_fig011775×806px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 51-10. External Real Time Oscillator with Load Capacitor
Figure 51-10. External Real Time Oscillator with Load Capacitor
P1096 · p1096_fig021373×664px
ATSAML10D15A-YF (SSOP-24-208mil) — Figure 51-11. Crystal Circuit With Internal, External and Parasitic Capacitance
Figure 51-11. Crystal Circuit With Internal, External and Parasitic Capacitance
P1096 · p1096_fig01P1096
ATSAML10D15A-YF (SSOP-24-208mil) — Datasheet Page 1096 (p1096_fig01)
Datasheet Page 1096 (p1096_fig01)
Page 1 / 2 (19 extracted figures)

Technical Specifications & Part Details (ATSAML10D15A-YF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATSAML10D15A-YF (SSOP-24-208mil) is a 24-pin standard electronic & interconnect component featuring a 8.20 × 5.30 × 1.85 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.62V to 3.63V supply operation across -40°C to 125°C with integrated UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, RTC/CLK, SWD/JTAG interfaces.
Operating Supply VoltageV_CC / V_DD
1.62V to 3.63V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to 125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
8.20 × 5.30 × 1.85 mm (A1=0.15 mm)
Package family: TSSOP (SSOP-24-208mil)
Pin Count & Lead PitchN / e
24 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, RTC/CLK, SWD/JTAG
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol24 auto-grouped pins
OK
IPC-7351B Land Pattern24 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — ATSAML10D15A / ATSAML11E16A (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SSOP-24-208mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
8.20 × 5.30 mm
Height (A) & Pitch (e)IPC-7351B
A=1.85mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.60 mm
Pins / Total PadsTopology
24P / 24Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SSOP-24-208mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATSAML10D15A-YF (SSOP-24-208mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATSAML10D15A-YF (SSOP-24-208mil)?

Manufactured by MICROCHIP, the ATSAML10D15A-YF is housed in a SSOP-24-208mil package with 24 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.62V to 3.63V. Key pins include: 1 (24-pin: Multiplexed I/O & Peripheral Pin 24-pin (General)), 2 (VDDIO: Power Supply Input (VDDIO — 1.62V to 3.63V)), 3 (PA30/SWCLK: Multiplexed I/O & Peripheral Pin PA30/SWCLK (SWD/JTAG)), 4 (PA31/SWDIO: Multiplexed I/O & Peripheral Pin PA31/SWDIO (SWD/JTAG)), 5 (PA00/XIN32: Multiplexed I/O & Peripheral Pin PA00/XIN32 (RTC/CLK)), 6 (PA01/XOUT32: Multiplexed I/O & Peripheral Pin PA01/XOUT32 (RTC/CLK)).

What are the IPC-7351B PCB Footprint dimensions for ATSAML10D15A-YF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATSAML10D15A-YF (SSOP-24-208mil) has a nominal body envelope of 5.30 × 8.20 mm, pitch e = 0.65 mm, and 24 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATSAML10D15A-YF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATSAML10D15A-YF (MICROCHIP, SSOP-24-208mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (24 pins) & ATSAML10D15A / ATSAML11E16A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
124-pinDigital_IOSignal terminal 24-pin (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: 24-pin. Supported peripheral buses: General.
2VDDIOPower_InPrimary positive power supply input (VDDIO) operating in the 1.62V to 3.63V domain (Max rating: 3.63V).
3PA30/SWCLKDigital_IOSignal terminal PA30/SWCLK (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA30/SWCLK. Supported peripheral buses: SWD/JTAG.
4PA31/SWDIODigital_IOSignal terminal PA31/SWDIO (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA31/SWDIO. Supported peripheral buses: SWD/JTAG.
5PA00/XIN32Digital_IOSignal terminal PA00/XIN32 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA00/XIN32. Supported peripheral buses: RTC/CLK.
6PA01/XOUT32Digital_IOSignal terminal PA01/XOUT32 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA01/XOUT32. Supported peripheral buses: RTC/CLK.
7PA02Digital_IOSignal terminal PA02 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA02. Supported peripheral buses: General.
8PA03Digital_IOSignal terminal PA03 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA03. Supported peripheral buses: General.
9PA04Digital_IOSignal terminal PA04 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA04. Supported peripheral buses: General.
10PA05Digital_IOSignal terminal PA05 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA05. Supported peripheral buses: General.
11VDDANAPower_InPrimary positive power supply input (VDDANA) operating in the 1.62V to 3.63V domain (Max rating: 3.63V).
12GNDANAGND0V electrical ground return terminal (GNDANA) for internal core logic, I/O drivers, and analog sub-blocks.
13PA08Digital_IOSignal terminal PA08 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA08. Supported peripheral buses: General.
14PA14/XOSCDigital_IOSignal terminal PA14/XOSC (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA14/XOSC. Supported peripheral buses: RTC/CLK.
15PA15/XOUTDigital_IOSignal terminal PA15/XOUT (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA15/XOUT. Supported peripheral buses: RTC/CLK.
16PA16Digital_IOSignal terminal PA16 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA16. Supported peripheral buses: General.
17PA17Digital_IOSignal terminal PA17 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA17. Supported peripheral buses: General.
18PA18Digital_IOSignal terminal PA18 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA18. Supported peripheral buses: General.
19PA19Digital_IOSignal terminal PA19 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA19. Supported peripheral buses: General.
20PA22Digital_IOSignal terminal PA22 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA22. Supported peripheral buses: General.
21PA23Digital_IOSignal terminal PA23 (I/O, 1.62V to 3.63V domain). Multiplexed alternate functions: PA23. Supported peripheral buses: General.
22RESET#Digital_IOActive-low hardware reset terminal (RESET#): pulling this pin Low resets the processor core and peripherals.
23VDDCOREPower_InPrimary positive power supply input (VDDCORE) operating in the 1.62V to 3.63V domain (Max rating: 3.63V).
24GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.