93C86AT-E/OT (SOT-23-6) — Symbol, Footprint IPC-7351B & 3D STEP Model

93C86AT-E/OT

MICROCHIPSOT-23-6 · 6 Pins · Pitch 0.95mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 93C86AT-E/OT (SOT-23-6)1DO2VSS3DI6VCC5CS4CLKGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123456E=2.90mm · Pitch e=0.95mmD=1.60mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.90mm × 1.60mm · Pitch: 0.95mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1DOI/OMultiplexed I/O & Peripheral Pin DO (General)
2VSSGNDGround Reference Pin (VSS)
3DII/OMultiplexed I/O & Peripheral Pin DI (General)
4CLKI/OMultiplexed I/O & Peripheral Pin CLK (General)
5CSI/OMultiplexed I/O & Peripheral Pin CS (General)
6VCCPowerPower Supply Input (VCC — 1.8V-5.5V)
PIN 1 DO
I/O
Multiplexed I/O & Peripheral Pin DO (General)
Design note: Data Out
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
93C86AT-E/OT (SOT-23-6) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
93C86AT-E/OT (SOT-23-6) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
93C86AT-E/OT (SOT-23-6) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
93C86AT-E/OT (SOT-23-6) - 4. Package Dimensions (D×E×A)
SOT-23-6 · 2.90×1.60mm · Pitch 0.95mmExpand ›
5. Recommended Land PatternLAND PATTERN
93C86AT-E/OT (SOT-23-6) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
93C86AT-E/OT (SOT-23-6) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for 93C86AT / 93AA86B
P14 · p14_fig01EXACT PACKAGE
93C86AT-E/OT (SOT-23-6) — 93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
P1 · p01_fig01376×200px
93C86AT-E/OT (SOT-23-6) — 16-Kbit Microwire Compatible Serial EEPROM
16-Kbit Microwire Compatible Serial EEPROM
P2 · p02_fig01P2
93C86AT-E/OT (SOT-23-6) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P14 · p14_fig01P14
93C86AT-E/OT (SOT-23-6) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P21 · p21_fig011061×1130px
93C86AT-E/OT (SOT-23-6) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P21 · p21_fig01P21
93C86AT-E/OT (SOT-23-6) — Datasheet Page 21 (p21_fig01)
Datasheet Page 21 (p21_fig01)
P25 · p25_fig011296×1612px
93C86AT-E/OT (SOT-23-6) — protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
P26 · p26_fig01981×927px
93C86AT-E/OT (SOT-23-6) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P32 · p32_fig01876×1020px
93C86AT-E/OT (SOT-23-6) — MILLIMETERS
MILLIMETERS
P2 · p02_fig01All Packages in PDF
93C86AT-E/OT (SOT-23-6) — 93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C
93AA86A/B/C, 93LC86A/B/C, 93C86A/B/C

Technical Specifications & Part Details (93C86AT-E/OT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:93C86AT-E/OT (SOT-23-6) is a 6-pin standard electronic & interconnect component featuring a 2.90 × 1.60 × 1.10 mm mechanical envelope (lead pitch e = 0.95 mm). Rated for 1.8V-5.5V supply operation across -40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V-5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.90 × 1.60 × 1.10 mm (A1=0.08 mm)
Package family: SOT23 (SOT-23-6)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.95 mm (37.4 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 0.95mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — 93C86AT / 93AA86B (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOT-23-6)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.90 × 1.60 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.95mm
Pad Size (W × L)Level B
0.60 × 1.00 mm
Pins / Total PadsTopology
6P / 6Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOT-23-6
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 93C86AT-E/OT (SOT-23-6)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 93C86AT-E/OT (SOT-23-6)?

Manufactured by MICROCHIP, the 93C86AT-E/OT is housed in a SOT-23-6 package with 6 pins and a 0.95 mm lead pitch, supporting a VCC supply range of 1.8V-5.5V. Key pins include: 1 (DO: Multiplexed I/O & Peripheral Pin DO (General)), 2 (VSS: Ground Reference Pin (VSS)), 3 (DI: Multiplexed I/O & Peripheral Pin DI (General)), 4 (CLK: Multiplexed I/O & Peripheral Pin CLK (General)), 5 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 6 (VCC: Power Supply Input (VCC — 1.8V-5.5V)).

What are the IPC-7351B PCB Footprint dimensions for 93C86AT-E/OT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 93C86AT-E/OT (SOT-23-6) has a nominal body envelope of 1.60 × 2.90 mm, pitch e = 0.95 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 93C86AT-E/OT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 93C86AT-E/OT (MICROCHIP, SOT-23-6) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & 93C86AT / 93AA86B Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1DODigital_IOSignal terminal DO (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: DO. Supported peripheral buses: General.
2VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
3DIDigital_IOSignal terminal DI (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: DI. Supported peripheral buses: General.
4CLKDigital_IOSignal terminal CLK (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: CLK. Supported peripheral buses: General.
5CSDigital_IOSignal terminal CS (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
6VCCPower_InPrimary positive power supply input (VCC) operating in the 1.8V-5.5V domain (Max rating: 5.5V).