25LC256T-E/SM (SOIC-8-208mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

25LC256T-E/SM

MICROCHIPSOIC-8-208mil · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 25LC256T-E/SM (SOIC-8-208mil)1CS2SO3WP4VSS8VCC7HOLD6SCK5SIGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=5.30mm · Pitch e=1.27mmD=5.30mm-6-5-4-3-2-10123456543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.30mm × 5.30mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CSI/OMultiplexed I/O & Peripheral Pin CS (General)
2SOI/OMultiplexed I/O & Peripheral Pin SO (General)
3WPI/OMultiplexed I/O & Peripheral Pin WP (General)
4VSSGNDGround Reference Pin (VSS)
5SII/OMultiplexed I/O & Peripheral Pin SI (General)
6SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
7HOLDI/OMultiplexed I/O & Peripheral Pin HOLD (General)
8VCCPowerPower Supply Input (VCC — 2.5V-5.5V)
PIN 1 CS
I/O
Multiplexed I/O & Peripheral Pin CS (General)
Design note: Chip Select Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
25LC256T-E/SM (SOIC-8-208mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
25LC256T-E/SM (SOIC-8-208mil) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
25LC256T-E/SM (SOIC-8-208mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
25LC256T-E/SM (SOIC-8-208mil) - 4. Package Dimensions (D×E×A)
SOIC-8-208mil · 5.30×5.30mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
25LC256T-E/SM (SOIC-8-208mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
25LC256T-E/SM (SOIC-8-208mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for 25LC256T / 25AA256
P1 · p01_fig02EXACT PACKAGE
25LC256T-E/SM (SOIC-8-208mil) — Note 1: 25XX256 is used in this document as a generic part number for the 25AA256/25LC256 devices.
Note 1: 25XX256 is used in this document as a generic part number for the 25AA256/25LC256 devices.
P14 · p14_fig01EXACT PACKAGE
25LC256T-E/SM (SOIC-8-208mil) — 25AA256/25LC256
25AA256/25LC256
P1 · p01_fig01376×200px
25LC256T-E/SM (SOIC-8-208mil) — 256K SPI Bus Serial EEPROM
256K SPI Bus Serial EEPROM
P1 · p01_fig02P1
25LC256T-E/SM (SOIC-8-208mil) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P14 · p14_fig01P14
25LC256T-E/SM (SOIC-8-208mil) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P22 · p22_fig011297×1485px
25LC256T-E/SM (SOIC-8-208mil) — protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
protrusions shall not exceed 0.15mm per side. 3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
P23 · p23_fig01990×909px
25LC256T-E/SM (SOIC-8-208mil) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P23 · p23_fig01P23
25LC256T-E/SM (SOIC-8-208mil) — Datasheet Page 23 (p23_fig01)
Datasheet Page 23 (p23_fig01)
P32 · p32_fig011776×1647px
25LC256T-E/SM (SOIC-8-208mil) — 25AA256/25LC256 | PRODUCT IDENTIFICATION SYSTEM (NON-AUTOMOTIVE) | To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. | PART NO. [X] /XX | Package Tape and Reel Device | Tape and R
25AA256/25LC256 | PRODUCT IDENTIFICATION SYSTEM (NON-AUTOMOTIVE) | To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. | PART NO. [X] /XX | Package Tape and Reel Device | Tape and R
P29 · p29_fig011777×1328px
25LC256T-E/SM (SOIC-8-208mil) — PINOUT_DIAGRAM — 25AA256-I/P (DIP-8)
PINOUT_DIAGRAM — 25AA256-I/P (DIP-8)
P21 · p21_fig01All Packages in PDF
25LC256T-E/SM (SOIC-8-208mil) — 25AA256/25LC256 [DIP-8]
25AA256/25LC256 [DIP-8]

Technical Specifications & Part Details (25LC256T-E/SM)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:25LC256T-E/SM (SOIC-8-208mil) is a 8-pin standard electronic & interconnect component featuring a 5.30 × 5.30 × 1.90 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.5V-5.5V supply operation across -40°C to +125°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V-5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
10 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.30 × 5.30 × 1.90 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8-208mil)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — 25LC256T / 25AA256 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOIC-8-208mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.30 × 5.30 mm
Height (A) & Pitch (e)IPC-7351B
A=1.90mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.95 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8-208mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 25LC256T-E/SM (SOIC-8-208mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 25LC256T-E/SM (SOIC-8-208mil)?

Manufactured by MICROCHIP, the 25LC256T-E/SM is housed in a SOIC-8-208mil package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.5V-5.5V. Key pins include: 1 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 2 (SO: Multiplexed I/O & Peripheral Pin SO (General)), 3 (WP: Multiplexed I/O & Peripheral Pin WP (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (SI: Multiplexed I/O & Peripheral Pin SI (General)), 6 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)).

What are the IPC-7351B PCB Footprint dimensions for 25LC256T-E/SM?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 25LC256T-E/SM (SOIC-8-208mil) has a nominal body envelope of 5.30 × 5.30 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 25LC256T-E/SM?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 25LC256T-E/SM (MICROCHIP, SOIC-8-208mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & 25LC256T / 25AA256 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CSDigital_IOSignal terminal CS (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
2SODigital_IOSignal terminal SO (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
3WPDigital_IOSignal terminal WP (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5SIDigital_IOSignal terminal SI (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
6SCKDigital_IOSignal terminal SCK (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
7HOLDDigital_IOSignal terminal HOLD (I/O, 2.5V-5.5V domain). Multiplexed alternate functions: HOLD. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 2.5V-5.5V domain (Max rating: 5.5V).