24CW1280T-I/SN (SOIC-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

24CW1280T-I/SN

MICROCHIPSOIC-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 24CW1280T-I/SN (SOIC-8)1NC2NC3NC4VSS8VCC7NC6SCL5SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4VSSGNDGround Reference Pin (VSS)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7NCI/OMultiplexed I/O & Peripheral Pin NC (General)
8VCCPowerPower Supply Input (VCC — 1.6V to 5.5V)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: No Connect
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
24CW1280T-I/SN (SOIC-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
24CW1280T-I/SN (SOIC-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
24CW1280T-I/SN (SOIC-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
24CW1280T-I/SN (SOIC-8) - 4. Package Dimensions (D×E×A)
SOIC-8 · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
24CW1280T-I/SN (SOIC-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
24CW1280T-I/SN (SOIC-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for 24CW1280T
P1 · p01_fig05EXACT PACKAGE
24CW1280T-I/SN (SOIC-8) — VSS SDA SDA
VSS SDA SDA
P1 · p01_fig01377×200px
24CW1280T-I/SN (SOIC-8) — 16K-128K I2C Serial EEPROM with Software Write
16K-128K I2C Serial EEPROM with Software Write
P1 · p01_fig02867×1339px
24CW1280T-I/SN (SOIC-8) — Name Function
Name Function
P1 · p01_fig03234×234px
24CW1280T-I/SN (SOIC-8) — Note 1: CS0 CSP ball pitch is 0.4x0.4 mm.
Note 1: CS0 CSP ball pitch is 0.4x0.4 mm.
P1 · p01_fig04239×233px
24CW1280T-I/SN (SOIC-8) — Note 1: CS0 CSP ball pitch is 0.4x0.4 mm.
Note 1: CS0 CSP ball pitch is 0.4x0.4 mm.
P1 · p01_fig02P1
24CW1280T-I/SN (SOIC-8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P1 · p01_fig03P1
24CW1280T-I/SN (SOIC-8) — Datasheet Page 1 (p01_fig03)
Datasheet Page 1 (p01_fig03)
P1 · p01_fig05P1
24CW1280T-I/SN (SOIC-8) — Datasheet Page 1 (p01_fig05)
Datasheet Page 1 (p01_fig05)
P2 · p02_fig011777×907px
24CW1280T-I/SN (SOIC-8) — The 24CW Series contains a pair of programmable Configuration registers which allow certain device behaviors to be modified. These registers are the Write Protection Register and the Hardware Address Register. | System Configuration Using S
The 24CW Series contains a pair of programmable Configuration registers which allow certain device behaviors to be modified. These registers are the Write Protection Register and the Hardware Address Register. | System Configuration Using S
P2 · p02_fig01P2
24CW1280T-I/SN (SOIC-8) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P28 · p28_fig02251×313px
24CW1280T-I/SN (SOIC-8) — 8-Lead 3.9 mm SOIC Example
8-Lead 3.9 mm SOIC Example
P28 · p28_fig051777×832px
24CW1280T-I/SN (SOIC-8) —  2018 Microchip Technology Inc. DS20005772B-page 28 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-s
 2018 Microchip Technology Inc. DS20005772B-page 28 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-s
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (24CW1280T-I/SN)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:24CW1280T-I/SN (SOIC-8) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.75 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.6V to 5.5V supply operation across -65°C to +150°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.6V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.75 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.75mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 24CW1280T-I/SN (SOIC-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 24CW1280T-I/SN (SOIC-8)?

Manufactured by MICROCHIP, the 24CW1280T-I/SN is housed in a SOIC-8 package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 1.6V to 5.5V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for 24CW1280T-I/SN?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 24CW1280T-I/SN (SOIC-8) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 24CW1280T-I/SN?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 24CW1280T-I/SN (MICROCHIP, SOIC-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & 24CW1280T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 1.6V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2NCNCSignal terminal NC (I/O, 1.6V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 1.6V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 1.6V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 1.6V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7NCNCSignal terminal NC (I/O, 1.6V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 1.6V to 5.5V domain (Max rating: 5.5V).