ATTINY441-MUR (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY441-MUR

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY441-MUR (QFN-20-EP(4x4))1IO12IO233V34NC5IO26DNC7DNC8GND9VCC10DNC11IO621GND20IO919DNC18DNC17DNC16IO1815IO1714IO1613IO1512IO7Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2IO2I/OGeneral Purpose Digital I/O Pin IO2
33V3Power3.3V Main Power Supply Rail (3.0V ~ 3.6V)
4NCNCNo Connect (Leave Floating)
5IO2I/OGPIO2 / RTC_GPIO2 / TOUCH2 / ADC1_CH1
6DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
7DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
8GNDGNDGround Reference Pin (GND)
9VCCPowerPower Supply Input (VCC — 1.7V – 2.4V)
10DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12IO7I/OGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13IO15I/OGPIO15 / RTC_GPIO15 / U0RTS / ADC2_CH4 / XTAL_32K_P
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18I/OGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
18DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
19DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21GNDGNDGround Reference Pin (GND)
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY441-MUR (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY441-MUR (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY441-MUR (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY441-MUR (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY441-MUR (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY441-MUR (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for ATTINY841 / ATTINY441
P2 · p02_fig022019×1582px
ATTINY441-MUR (QFN-20-EP(4x4)) — Figure 1-2. Pinout in 20-pad VQFN/WQFN.
Figure 1-2. Pinout in 20-pad VQFN/WQFN.
P2 · p02_fig02P2
ATTINY441-MUR (QFN-20-EP(4x4)) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P239 · p239_fig011908×305px
ATTINY441-MUR (QFN-20-EP(4x4)) — Figure 25-2. External Clock Drive Waveform
Figure 25-2. External Clock Drive Waveform
P239 · p239_fig021908×1033px
ATTINY441-MUR (QFN-20-EP(4x4)) — Figure 25-2. External Clock Drive Waveform
Figure 25-2. External Clock Drive Waveform
P239 · p239_fig02P239
ATTINY441-MUR (QFN-20-EP(4x4)) — Datasheet Page 239 (p239_fig02)
Datasheet Page 239 (p239_fig02)
P248 · p248_fig011846×850px
ATTINY441-MUR (QFN-20-EP(4x4)) — Figure 25-7. Maximum Operating Frequency vs. Supply Voltage
Figure 25-7. Maximum Operating Frequency vs. Supply Voltage
P248 · p248_fig021908×305px
ATTINY441-MUR (QFN-20-EP(4x4)) — Table 25-15. Calibration Accuracy of Internal 32kHz Oscillator
Table 25-15. Calibration Accuracy of Internal 32kHz Oscillator
P356 · p356_fig012012×2175px
ATTINY441-MUR (QFN-20-EP(4x4)) — 30.2 20M1
30.2 20M1
P356 · p356_fig01P356
ATTINY441-MUR (QFN-20-EP(4x4)) — Datasheet Page 356 (p356_fig01)
Datasheet Page 356 (p356_fig01)
P357 · p357_fig012039×2175px
ATTINY441-MUR (QFN-20-EP(4x4)) — 30.3 20M2
30.3 20M2
P2 · p02_fig01All Packages in PDF
ATTINY441-MUR (QFN-20-EP(4x4)) — Figure 1-1. Pinout in 14-pin SOIC.
Figure 1-1. Pinout in 14-pin SOIC.
P355 · p355_fig01All Packages in PDF
ATTINY441-MUR (QFN-20-EP(4x4)) — 355 ATtiny441/841 [DATASHEET]
355 ATtiny441/841 [DATASHEET]

Technical Specifications & Part Details (ATTINY441-MUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY441-MUR (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.7V – 2.4V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated SPI, I2C, ADC, PWM, RTC/CLK, UART interfaces.
Operating Supply VoltageV_CC / V_DD
1.7V – 2.4V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
16 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.80 mm (A1=0.04 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, I2C, ADC, PWM, RTC/CLK, UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.26 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY441-MUR (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY441-MUR (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the ATTINY441-MUR is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.7V – 2.4V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 (IO2: General Purpose Digital I/O Pin IO2), 3 (3V3: 3.3V Main Power Supply Rail (3.0V ~ 3.6V)), 4 (NC: No Connect (Leave Floating)), 5 (IO2: GPIO2 / RTC_GPIO2 / TOUCH2 / ADC1_CH1), 6 (DNC: Multiplexed I/O & Peripheral Pin DNC (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY441-MUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY441-MUR (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY441-MUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY441-MUR (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & ATTINY841 / ATTINY441 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2IO2Digital_IOGeneral Purpose Digital I/O Pin IO2
33V3Power_In3.3V Main Power Supply Rail (3.0V ~ 3.6V)
4NCNo_ConnectNo Connect (Leave Floating)
5IO2Digital_IOGPIO2 / RTC_GPIO2 / TOUCH2 / ADC1_CH1
6DNCNCSignal terminal DNC (I/O, 1.7V – 2.4V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
7DNCNCSignal terminal DNC (I/O, 1.7V – 2.4V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9VCCPower_InPrimary positive power supply input (VCC) operating in the 1.7V – 2.4V domain (Max rating: 2.4V).
10DNCNCSignal terminal DNC (I/O, 1.7V – 2.4V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12IO7Digital_IOGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13IO15Digital_IOGPIO15 / RTC_GPIO15 / U0RTS / ADC2_CH4 / XTAL_32K_P
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18Digital_IOGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17DNCNCSignal terminal DNC (I/O, 1.7V – 2.4V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
18DNCNCSignal terminal DNC (I/O, 1.7V – 2.4V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
19DNCNCSignal terminal DNC (I/O, 1.7V – 2.4V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.