AT17LV512A-10PU (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT17LV512A-10PU

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT17LV512A-10PU (PDIP-8)1DATA2CLK3RESET/OE#4CE#8VCC7SER_EN#6CEO#5GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=1.56mm · Pitch e=2.54mmD=6.35mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 1.56mm × 6.35mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1DATAI/OMultiplexed I/O & Peripheral Pin DATA (General)
2CLKI/OMultiplexed I/O & Peripheral Pin CLK (General)
3RESET/OE#ISystem Enable & Hardware Reset (RESET/OE#)
4CE#I/OMultiplexed I/O & Peripheral Pin CE# (General)
5GNDGNDGround Reference Pin (GND)
6CEO#I/OMultiplexed I/O & Peripheral Pin CEO# (General)
7SER_EN#I/OMultiplexed I/O & Peripheral Pin SER_EN# (General)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
PIN 1 DATA
I/O
Multiplexed I/O & Peripheral Pin DATA (General)
Design note: Signal terminal DATA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DATA. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT17LV512A-10PU (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT17LV512A-10PU (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT17LV512A-10PU (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT17LV512A-10PU (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 1.56×6.35mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT17LV512A-10PU (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT17LV512A-10PU (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for AT17LV512A
P5 · p05_fig01EXACT PACKAGE
AT17LV512A-10PU (PDIP-8) — Figure 1-1. Pinouts(1)
Figure 1-1. Pinouts(1)
P17 · p17_fig01EXACT PACKAGE
AT17LV512A-10PU (PDIP-8) — 17 AT17LV65/128/256/512/010/002/040 [DATASHEET]
17 AT17LV65/128/256/512/010/002/040 [DATASHEET]
P5 · p05_fig01P5
AT17LV512A-10PU (PDIP-8) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)
P16 · p16_fig011983×2412px
AT17LV512A-10PU (PDIP-8) — AT17LV65/128/256/512/010/002/040 [DATASHEET]
AT17LV65/128/256/512/010/002/040 [DATASHEET]
P17 · p17_fig01P17
AT17LV512A-10PU (PDIP-8) — Datasheet Page 17 (p17_fig01)
Datasheet Page 17 (p17_fig01)
P5 · p05_fig02All Packages in PDF
AT17LV512A-10PU (PDIP-8) — 20-lead SOIC (Top View) AT17LV65/128/256 Only(5)
20-lead SOIC (Top View) AT17LV65/128/256 Only(5)
P5 · p05_fig03All Packages in PDF
AT17LV512A-10PU (PDIP-8) — NC RESET/OE NC CE NC NC GND NC NC CEO (A2) NC
NC RESET/OE NC CE NC NC GND NC NC CEO (A2) NC

Technical Specifications & Part Details (AT17LV512A-10PU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT17LV512A-10PU (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 1.56 × 6.35 × 3.67 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
10 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
1.56 × 6.35 × 3.67 mm (A1=0.38 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
1.56 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=3.67mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT17LV512A-10PU (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT17LV512A-10PU (PDIP-8)?

Manufactured by MICROCHIP, the AT17LV512A-10PU is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch. Key pins include: 1 (DATA: Multiplexed I/O & Peripheral Pin DATA (General)), 2 (CLK: Multiplexed I/O & Peripheral Pin CLK (General)), 3 (RESET/OE#: System Enable & Hardware Reset (RESET/OE#)), 4 (CE#: Multiplexed I/O & Peripheral Pin CE# (General)), 5 (GND: Ground Reference Pin (GND)), 6 (CEO#: Multiplexed I/O & Peripheral Pin CEO# (General)).

What are the IPC-7351B PCB Footprint dimensions for AT17LV512A-10PU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT17LV512A-10PU (PDIP-8) has a nominal body envelope of 6.35 × 1.56 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT17LV512A-10PU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT17LV512A-10PU (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & AT17LV512A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1DATADigital_IOSignal terminal DATA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DATA. Supported peripheral buses: General.
2CLKDigital_IOSignal terminal CLK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CLK. Supported peripheral buses: General.
3RESET/OE#Digital_IOActive-low hardware reset terminal (RESET/OE#): pulling this pin Low resets the processor core and peripherals.
4CE#Digital_IOSignal terminal CE# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CE#. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6CEO#Digital_IOSignal terminal CEO# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CEO#. Supported peripheral buses: General.
7SER_EN#Digital_IOSignal terminal SER_EN# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SER_EN#. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).