23LCV1024-I/P (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

23LCV1024-I/P

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 23LCV1024-I/P (PDIP-8)1CS2SO/SIO13NC4VSS8VCC7VBAT6SCK5SI/SIO0Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=6.35mm · Pitch e=2.54mmD=9.62mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 6.35mm × 9.62mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CSI/OMultiplexed I/O & Peripheral Pin CS (General)
2SO/SIO1I/OMultiplexed I/O & Peripheral Pin SO/SIO1 (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4VSSGNDGround Reference Pin (VSS)
5SI/SIO0I/OMultiplexed I/O & Peripheral Pin SI/SIO0 (General)
6SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
7VBATPowerPower Supply Input (VBAT — 3.3V / 5.0V Standard Logic)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
PIN 1 CS
I/O
Multiplexed I/O & Peripheral Pin CS (General)
Design note: Chip Select Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
23LCV1024-I/P (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
23LCV1024-I/P (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
23LCV1024-I/P (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
23LCV1024-I/P (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 6.35×9.62mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
23LCV1024-I/P (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
23LCV1024-I/P (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for 23LCV1024
P1 · p01_fig011777×521px
23LCV1024-I/P (PDIP-8) — Part Number VCC Range Dual I/O (SDI) Battery Backup Max. Clock Frequency Packages
Part Number VCC Range Dual I/O (SDI) Battery Backup Max. Clock Frequency Packages
P1 · p01_fig02376×200px
23LCV1024-I/P (PDIP-8) — 1 Mbit SPI Serial SRAM with Battery Backup and SDI Interface
1 Mbit SPI Serial SRAM with Battery Backup and SDI Interface
P12 · p12_fig01867×935px
23LCV1024-I/P (PDIP-8) — The SO pin is used to transfer data out of the 23LCV1024. During a read cycle, data is shifted out on this pin after the falling edge of the serial clock.
The SO pin is used to transfer data out of the 23LCV1024. During a read cycle, data is shifted out on this pin after the falling edge of the serial clock.
P12 · p12_fig01P12
23LCV1024-I/P (PDIP-8) — Datasheet Page 12 (p12_fig01)
Datasheet Page 12 (p12_fig01)
P16 · p16_fig01P16
23LCV1024-I/P (PDIP-8) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
P1 · p01_fig03All Packages in PDF
23LCV1024-I/P (PDIP-8) — The 23LCV1024 is available in standard packages including 8-lead SOIC, PDIP and advanced 8-lead TSSOP. | Package Types (not to scale) | CS | SO/SIO1 | NC | Vss | Vcc | VBAT | SCK | SI/SIO0 | 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | SOIC/TSSOP/PDIP
The 23LCV1024 is available in standard packages including 8-lead SOIC, PDIP and advanced 8-lead TSSOP. | Package Types (not to scale) | CS | SO/SIO1 | NC | Vss | Vcc | VBAT | SCK | SI/SIO0 | 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | SOIC/TSSOP/PDIP
P16 · p16_fig01All Packages in PDF
23LCV1024-I/P (PDIP-8) — 6.1 Package Marking Information
6.1 Package Marking Information

Technical Specifications & Part Details (23LCV1024-I/P)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:23LCV1024-I/P (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 9.62 × 6.35 × 4.50 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -65°C to +150°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.62 × 6.35 × 4.50 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.62 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 23LCV1024-I/P (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 23LCV1024-I/P (PDIP-8)?

Manufactured by MICROCHIP, the 23LCV1024-I/P is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch. Key pins include: 1 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 2 (SO/SIO1: Multiplexed I/O & Peripheral Pin SO/SIO1 (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (SI/SIO0: Multiplexed I/O & Peripheral Pin SI/SIO0 (General)), 6 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)).

What are the IPC-7351B PCB Footprint dimensions for 23LCV1024-I/P?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 23LCV1024-I/P (PDIP-8) has a nominal body envelope of 6.35 × 9.62 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 23LCV1024-I/P?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 23LCV1024-I/P (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & 23LCV1024 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CSDigital_IOSignal terminal CS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
2SO/SIO1Digital_IOSignal terminal SO/SIO1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SO/SIO1. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5SI/SIO0Digital_IOSignal terminal SI/SIO0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SI/SIO0. Supported peripheral buses: General.
6SCKDigital_IOSignal terminal SCK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
7VBATPower_InPrimary positive power supply input (VBAT) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).