ATTINY48-MMU (QFN-28-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY48-MMU

MICROCHIPQFN-28-EP(4x4) · 29 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY48-MMU (QFN-28-EP(4x4))1DIEOV2(PCINT20/T0)3VCC4GND5(PCINT6/CLKI6(PCINT7)PB77(PCINT21/T1)8(PCINT22/AIN9(PCINT23/AIN10(PCINT0/CLKO11(PCINT1/OC1A12(PCINT2/SS/O13(PCINT3//MOS14(PCINT4/MISO15PB5(SCK/PCIN29GND28PD2(INT0/PCI27PD1(PCINT17)26PD0(PCINT16)25PC6(RESET/PC24PC5(ADC5/SCL23PC4(ADC4/SDA22PC3(ADC3/PCI21PC2(ADC2/PCI20PC1(ADC1/PCI19PC0(ADC0/PCI18GND17PC7(PCINT15)16AVCCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1DIEOVI/OMultiplexed I/O & Peripheral Pin DIEOV (General)
2(PCINT20/T0)PD4I/OMultiplexed I/O & Peripheral Pin (PCINT20/T0)PD4 (General)
3VCCPowerPower Supply Input (VCC — 1.8V to 5.5V)
4GNDGNDGround Reference Pin (GND)
5(PCINT6/CLKI)PB6I/OMultiplexed I/O & Peripheral Pin (PCINT6/CLKI)PB6 (General)
6(PCINT7)PB7I/OMultiplexed I/O & Peripheral Pin (PCINT7)PB7 (General)
7(PCINT21/T1)PD5I/OMultiplexed I/O & Peripheral Pin (PCINT21/T1)PD5 (General)
8(PCINT22/AIN0)PD6I/OMultiplexed I/O & Peripheral Pin (PCINT22/AIN0)PD6 (ADC)
9(PCINT23/AIN1)PD7I/OMultiplexed I/O & Peripheral Pin (PCINT23/AIN1)PD7 (ADC)
10(PCINT0/CLKO/ICP1)PB0I/OMultiplexed I/O & Peripheral Pin (PCINT0/CLKO/ICP1)PB0 (General)
11(PCINT1/OC1A)PB1I/OMultiplexed I/O & Peripheral Pin (PCINT1/OC1A)PB1 (PWM)
12(PCINT2/SS/OC1B)PB2I/OMultiplexed I/O & Peripheral Pin (PCINT2/SS/OC1B)PB2 (PWM)
13(PCINT3//MOSI)PB3I/OMultiplexed I/O & Peripheral Pin (PCINT3//MOSI)PB3 (SPI)
14(PCINT4/MISO)PB4I/OMultiplexed I/O & Peripheral Pin (PCINT4/MISO)PB4 (SPI)
15PB5(SCK/PCINT5)I/OMultiplexed I/O & Peripheral Pin PB5(SCK/PCINT5) (SPI)
16AVCCPowerPower Supply Input (AVCC — 1.8V to 5.5V)
17PC7(PCINT15)I/OMultiplexed I/O & Peripheral Pin PC7(PCINT15) (General)
18GNDGNDGround Reference Pin (GND)
19PC0(ADC0/PCINT8)I/OMultiplexed I/O & Peripheral Pin PC0(ADC0/PCINT8) (ADC)
20PC1(ADC1/PCINT9)I/OMultiplexed I/O & Peripheral Pin PC1(ADC1/PCINT9) (ADC)
21PC2(ADC2/PCINT10)I/OMultiplexed I/O & Peripheral Pin PC2(ADC2/PCINT10) (ADC)
22PC3(ADC3/PCINT11)I/OMultiplexed I/O & Peripheral Pin PC3(ADC3/PCINT11) (ADC)
23PC4(ADC4/SDA/PCINT12)I/OMultiplexed I/O & Peripheral Pin PC4(ADC4/SDA/PCINT12) (I2C, ADC)
24PC5(ADC5/SCL/PCINT13)I/OMultiplexed I/O & Peripheral Pin PC5(ADC5/SCL/PCINT13) (I2C, ADC)
25PC6(RESET/PCINT14)ISystem Enable & Hardware Reset (PC6(RESET/PCINT14))
26PD0(PCINT16)I/OMultiplexed I/O & Peripheral Pin PD0(PCINT16) (General)
27PD1(PCINT17)I/OMultiplexed I/O & Peripheral Pin PD1(PCINT17) (General)
28PD2(INT0/PCINT18)I/OMultiplexed I/O & Peripheral Pin PD2(INT0/PCINT18) (General)
29GNDGNDGround Reference Pin (GND)
PIN 1 DIEOV
I/O
Multiplexed I/O & Peripheral Pin DIEOV (General)
Design note: Signal terminal DIEOV (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: DIEOV. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY48-MMU (QFN-28-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY48-MMU (QFN-28-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY48-MMU (QFN-28-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY48-MMU (QFN-28-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-28-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY48-MMU (QFN-28-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY48-MMU (QFN-28-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for ATTINY48
P1 · p01_fig01652×376px
ATTINY48-MMU (QFN-28-EP(4x4)) — 8-bit Microcontroller with 4/8K Bytes In-System Programmable Flash
8-bit Microcontroller with 4/8K Bytes In-System Programmable Flash
P2 · p02_fig011741×1774px
ATTINY48-MMU (QFN-28-EP(4x4)) — Figure 1-1. Pinout of ATtiny48/88
Figure 1-1. Pinout of ATtiny48/88
P2 · p02_fig021702×711px
ATTINY48-MMU (QFN-28-EP(4x4)) — 8008H-AVR-04/11 ATtiny48/88 | (PCINT21/T1) PD5 (PCINT22/AIN0) PD6 (PCINT23/AIN1) PD7 (PCINT0/CLKO/ICP1) PB0 (PCINT1/OC1A) PB1 (PCINT2/SS/OC1B) PB2 (PCINT3/MOSI) PB3 (PCINT4/MISO) PB4 | (PCINT22/AIN0) PD6 (PCINT23/AIN1) PD7 (PCINT0/CLKO/ICP1
8008H-AVR-04/11 ATtiny48/88 | (PCINT21/T1) PD5 (PCINT22/AIN0) PD6 (PCINT23/AIN1) PD7 (PCINT0/CLKO/ICP1) PB0 (PCINT1/OC1A) PB1 (PCINT2/SS/OC1B) PB2 (PCINT3/MOSI) PB3 (PCINT4/MISO) PB4 | (PCINT22/AIN0) PD6 (PCINT23/AIN1) PD7 (PCINT0/CLKO/ICP1
P2 · p02_fig01P2
ATTINY48-MMU (QFN-28-EP(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P63 · p63_fig011429×784px
ATTINY48-MMU (QFN-28-EP(4x4)) — Figure 10-4. Synchronization when Reading an Externally Applied Pin value
Figure 10-4. Synchronization when Reading an Externally Applied Pin value
P285 · p285_fig012128×2773px
ATTINY48-MMU (QFN-28-EP(4x4)) — 285 | 8008H-AVR-04/11 | ATtiny48/88 | 27. Packaging Information | 27.1 28M1 | 10/24/08 | SIDE VIEW | Pin 1 ID | BOTTOM VIEW | TOP VIEW | Note: The terminal #1 ID is a Laser-marked Feature. | D | E | e | K | A1 | C | A | D2 | E2 | y | L | 1
285 | 8008H-AVR-04/11 | ATtiny48/88 | 27. Packaging Information | 27.1 28M1 | 10/24/08 | SIDE VIEW | Pin 1 ID | BOTTOM VIEW | TOP VIEW | Note: The terminal #1 ID is a Laser-marked Feature. | D | E | e | K | A1 | C | A | D2 | E2 | y | L | 1
P285 · p285_fig01P285
ATTINY48-MMU (QFN-28-EP(4x4)) — Datasheet Page 285 (p285_fig01)
Datasheet Page 285 (p285_fig01)
P288 · p288_fig012121×2385px
ATTINY48-MMU (QFN-28-EP(4x4)) — 27.4 32CC1
27.4 32CC1
P289 · p289_fig012128×2773px
ATTINY48-MMU (QFN-28-EP(4x4)) — 289 | 8008H-AVR-04/11 | ATtiny48/88 | 27.5 32M1-A | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 32M1-A, 32-pad, 5 x 5 x 1.0 mm Body, Lead Pitch 0.50 mm, E 32M1-A | 5/25/06 | 3.10 mm Exposed Pad, Micro Lead Frame P
289 | 8008H-AVR-04/11 | ATtiny48/88 | 27.5 32M1-A | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 32M1-A, 32-pad, 5 x 5 x 1.0 mm Body, Lead Pitch 0.50 mm, E 32M1-A | 5/25/06 | 3.10 mm Exposed Pad, Micro Lead Frame P

Technical Specifications & Part Details (ATTINY48-MMU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY48-MMU (QFN-28-EP(4x4)) is a 28-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 5.5V supply operation across -40°C to +85°C with integrated SPI, I2C, ADC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.90 mm (A1=0.04 mm)
Package family: QFN (QFN-28-EP(4x4))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, I2C, ADC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×2.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-28-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.26 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-28-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY48-MMU (QFN-28-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY48-MMU (QFN-28-EP(4x4))?

Manufactured by MICROCHIP, the ATTINY48-MMU is housed in a QFN-28-EP(4x4) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (DIEOV: Multiplexed I/O & Peripheral Pin DIEOV (General)), 2 ((PCINT20/T0)PD4: Multiplexed I/O & Peripheral Pin (PCINT20/T0)PD4 (General)), 3 (VCC: Power Supply Input (VCC — 1.8V to 5.5V)), 4 (GND: Ground Reference Pin (GND)), 5 ((PCINT6/CLKI)PB6: Multiplexed I/O & Peripheral Pin (PCINT6/CLKI)PB6 (General)), 6 ((PCINT7)PB7: Multiplexed I/O & Peripheral Pin (PCINT7)PB7 (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY48-MMU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY48-MMU (QFN-28-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 2.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY48-MMU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY48-MMU (MICROCHIP, QFN-28-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & ATTINY48 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1DIEOVDigital_IOSignal terminal DIEOV (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: DIEOV. Supported peripheral buses: General.
2(PCINT20/T0)PD4Digital_IOSignal terminal (PCINT20/T0)PD4 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT20/T0)PD4. Supported peripheral buses: General.
3VCCPower_InPrimary positive power supply input (VCC) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5(PCINT6/CLKI)PB6Digital_IOSignal terminal (PCINT6/CLKI)PB6 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT6/CLKI)PB6. Supported peripheral buses: General.
6(PCINT7)PB7Digital_IOSignal terminal (PCINT7)PB7 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT7)PB7. Supported peripheral buses: General.
7(PCINT21/T1)PD5Digital_IOSignal terminal (PCINT21/T1)PD5 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT21/T1)PD5. Supported peripheral buses: General.
8(PCINT22/AIN0)PD6AnalogSignal terminal (PCINT22/AIN0)PD6 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT22/AIN0)PD6. Supported peripheral buses: ADC.
9(PCINT23/AIN1)PD7AnalogSignal terminal (PCINT23/AIN1)PD7 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT23/AIN1)PD7. Supported peripheral buses: ADC.
10(PCINT0/CLKO/ICP1)PB0Digital_IOSignal terminal (PCINT0/CLKO/ICP1)PB0 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT0/CLKO/ICP1)PB0. Supported peripheral buses: General.
11(PCINT1/OC1A)PB1Digital_IOSignal terminal (PCINT1/OC1A)PB1 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT1/OC1A)PB1. Supported peripheral buses: PWM.
12(PCINT2/SS/OC1B)PB2Digital_IOSignal terminal (PCINT2/SS/OC1B)PB2 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT2/SS/OC1B)PB2. Supported peripheral buses: PWM.
13(PCINT3//MOSI)PB3Digital_IOSignal terminal (PCINT3//MOSI)PB3 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT3//MOSI)PB3. Supported peripheral buses: SPI.
14(PCINT4/MISO)PB4Digital_IOSignal terminal (PCINT4/MISO)PB4 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (PCINT4/MISO)PB4. Supported peripheral buses: SPI.
15PB5(SCK/PCINT5)Digital_IOSignal terminal PB5(SCK/PCINT5) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PB5(SCK/PCINT5). Supported peripheral buses: SPI.
16AVCCPower_InPrimary positive power supply input (AVCC) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
17PC7(PCINT15)Digital_IOSignal terminal PC7(PCINT15) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC7(PCINT15). Supported peripheral buses: General.
18GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
19PC0(ADC0/PCINT8)AnalogSignal terminal PC0(ADC0/PCINT8) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC0(ADC0/PCINT8). Supported peripheral buses: ADC.
20PC1(ADC1/PCINT9)AnalogSignal terminal PC1(ADC1/PCINT9) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC1(ADC1/PCINT9). Supported peripheral buses: ADC.
21PC2(ADC2/PCINT10)AnalogSignal terminal PC2(ADC2/PCINT10) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC2(ADC2/PCINT10). Supported peripheral buses: ADC.
22PC3(ADC3/PCINT11)AnalogSignal terminal PC3(ADC3/PCINT11) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC3(ADC3/PCINT11). Supported peripheral buses: ADC.
23PC4(ADC4/SDA/PCINT12)Digital_IOSignal terminal PC4(ADC4/SDA/PCINT12) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC4(ADC4/SDA/PCINT12). Supported peripheral buses: I2C, ADC.
24PC5(ADC5/SCL/PCINT13)Digital_IOSignal terminal PC5(ADC5/SCL/PCINT13) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PC5(ADC5/SCL/PCINT13). Supported peripheral buses: I2C, ADC.
25PC6(RESET/PCINT14)Digital_IOActive-low hardware reset terminal (PC6(RESET/PCINT14)): pulling this pin Low resets the processor core and peripherals.
26PD0(PCINT16)Digital_IOSignal terminal PD0(PCINT16) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PD0(PCINT16). Supported peripheral buses: General.
27PD1(PCINT17)Digital_IOSignal terminal PD1(PCINT17) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PD1(PCINT17). Supported peripheral buses: General.
28PD2(INT0/PCINT18)Digital_IOSignal terminal PD2(INT0/PCINT18) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PD2(INT0/PCINT18). Supported peripheral buses: General.
29GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.