ChipDocs.org
⌘K
2284 PARTSUpload PDF
KP3310DP (DIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

KP3310DP

Kiwi InstrumentsID: C554032DIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · KP3310DP (DIP-8)1GND2VDD3SEL4VOUT8Drain7Drain6Drain5NCGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=9.20mm · Pitch e=2.54mmD=6.40mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 9.20mm × 6.40mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GNDGNDGround Reference Pin (GND)
2VDDPowerPower Supply Input (VDD — 3.3V / 5.0V Standard Logic)
3SELI/OMultiplexed I/O & Peripheral Pin SEL (General)
4VOUTPowerRegulated Power Output (VOUT — 3.3V / 5.0V Standard Logic)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6DrainI/OMultiplexed I/O & Peripheral Pin Drain (General)
7DrainI/OMultiplexed I/O & Peripheral Pin Drain (General)
8DrainI/OMultiplexed I/O & Peripheral Pin Drain (General)
PIN 1 GND
GND
Ground Reference Pin (GND)
Design note: 0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
IPC-7351B Solder Density & Span C/G/Z Tuner

Live Embedded Datasheet PDF & Technical Drawing Gallery (6 Standard Drawings)

Read the original datasheet PDF directly or click any drawing to view fullscreen
Open PDF in New Window ↗Read Datasheet PDF (.pdf)
PDF VIEWEROfficial Datasheet Document: KP3310DP (Kiwi Instruments · DIP-8)
Scroll, search text (Ctrl+F), or expand directly inside the embedded PDF reader below
1. Realistic 3D PackageREPRESENTATIVE
KP3310DP (DIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
KP3310DP (DIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
KP3310DP (DIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
KP3310DP (DIP-8) - 4. Package Dimensions (D×E×A)
DIP-8 · 9.20×6.40mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
KP3310DP (DIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
KP3310DP (DIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›

Technical Specifications & Part Details (KP3310DP)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:KP3310DP (DIP-8) is a 8-pin standard electronic & interconnect component featuring a 9.02 × 10.25 × 4.50 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.02 × 10.25 × 4.50 mm (A1=0.51 mm)
Package family: DIP (DIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.20 × 6.40 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — KP3310DP (DIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of KP3310DP (DIP-8)?

Manufactured by Kiwi Instruments, the KP3310DP is housed in a DIP-8 package with 8 pins and a 2.54 mm lead pitch. Key pins include: 1 (GND: Ground Reference Pin (GND)), 2 (VDD: Power Supply Input (VDD — 3.3V / 5.0V Standard Logic)), 3 (SEL: Multiplexed I/O & Peripheral Pin SEL (General)), 4 (VOUT: Regulated Power Output (VOUT — 3.3V / 5.0V Standard Logic)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (Drain: Multiplexed I/O & Peripheral Pin Drain (General)).

What are the IPC-7351B PCB Footprint dimensions for KP3310DP?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), KP3310DP (DIP-8) has a nominal body envelope of 6.40 × 9.20 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for KP3310DP?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for KP3310DP (Kiwi Instruments, DIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & KP3310 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
2VDDPower_InPrimary positive power supply input (VDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
3SELDigital_IOSignal terminal SEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SEL. Supported peripheral buses: General.
4VOUTPower_OutRegulated power output rail (VOUT) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
5NCDigital_IOSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6DrainDigital_IOSignal terminal Drain (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Drain. Supported peripheral buses: General.
7DrainDigital_IOSignal terminal Drain (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Drain. Supported peripheral buses: General.
8DrainDigital_IOSignal terminal Drain (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Drain. Supported peripheral buses: General.
ExplorePartsPackagesMFRsUpload