C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) — Symbol, Footprint IPC-7351B & 3D STEP Model

C3685626

SemiconductorPDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1)1MR#2VCC3GND4PFI8RESET7RESET#6NC5PFO#Grid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=6.35mm · Pitch e=2.54mmD=9.62mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 6.35mm × 9.62mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1MR#I/OMultiplexed I/O & Peripheral Pin MR# (General)
2VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
3GNDGNDGround Reference Pin (GND)
4PFII/OMultiplexed I/O & Peripheral Pin PFI (General)
5PFO#I/OMultiplexed I/O & Peripheral Pin PFO# (General)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7RESET#ISystem Enable & Hardware Reset (RESET#)
8RESETISystem Enable & Hardware Reset (RESET)
PIN 1 MR#
I/O
Multiplexed I/O & Peripheral Pin MR# (General)
Design note: Signal terminal MR# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MR#. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) - 4. Package Dimensions (D×E×A)
PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1 · 6.35×9.62mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) - 6. Application Schematic
Typical Application SchematicExpand ›

Technical Specifications & Part Details (C3685626)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) is a 8-pin standard electronic & interconnect component featuring a 9.62 × 6.35 × 4.20 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.62 × 6.35 × 4.20 mm (A1=0.51 mm)
Package family: DIP (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.62 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.20mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1)?

Manufactured by Semiconductor, the C3685626 is housed in a PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1 package with 8 pins and a 2.54 mm lead pitch. Key pins include: 1 (MR#: Multiplexed I/O & Peripheral Pin MR# (General)), 2 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)), 3 (GND: Ground Reference Pin (GND)), 4 (PFI: Multiplexed I/O & Peripheral Pin PFI (General)), 5 (PFO#: Multiplexed I/O & Peripheral Pin PFO# (General)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for C3685626?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), C3685626 (PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) has a nominal body envelope of 6.35 × 9.62 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for C3685626?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for C3685626 (Semiconductor, PDIP-8_L9.6-W6.4-P2.54-LS7.6-BL-1) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & C3685626 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1MR#Digital_IOSignal terminal MR# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MR#. Supported peripheral buses: General.
2VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4PFIDigital_IOSignal terminal PFI (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PFI. Supported peripheral buses: General.
5PFO#Digital_IOSignal terminal PFO# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PFO#. Supported peripheral buses: General.
6NCDigital_IOSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7RESET#Digital_IOActive-low hardware reset terminal (RESET#): pulling this pin Low resets the processor core and peripherals.
8RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.