PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC24FJ64GP202T-I/MV

MICROCHIPUQFN-28(4x4) · 29 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC24FJ64GP202T-I/MV (UQFN-28(4x4))1IO12IO23AN4/C1INB/RP4AN5/C1INA/RP5VSS6OSCI/CLKI/C17OSCO/CLKO/C28SOSCI/C2IND/9IO410VDD11PGED3/RP5/AS12PGEC3/RP6/AS13RP7/INT0/RB714TDI/RA915AN13/RP19/RC29EP28IO3327IO4726MCLR#25AVDD/VDD24RP8/SCL1(2)/23RP7/INT0/RB722PGEC3/RP6/AS21PGED3/RP5/AS20RPI32/RA1419VDD18VSS17RP21/RC516RP20/RC4Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2IO2I/OGeneral Purpose Digital I/O Pin IO2
3AN4/C1INB/RP2/SDA2/RB2I/OMultiplexed I/O & Peripheral Pin AN4/C1INB/RP2/SDA2/RB2 (I2C)
4AN5/C1INA/RP3/SCL2/RB3I/OMultiplexed I/O & Peripheral Pin AN5/C1INA/RP3/SCL2/RB3 (I2C)
5VSSGNDGround Reference Pin (VSS)
6OSCI/CLKI/C1IND/RA2I/OMultiplexed I/O & Peripheral Pin OSCI/CLKI/C1IND/RA2 (RTC/CLK)
7OSCO/CLKO/C2IND/RA3I/OMultiplexed I/O & Peripheral Pin OSCO/CLKO/C2IND/RA3 (RTC/CLK)
8SOSCI/C2IND/RP4/RB4I/OMultiplexed I/O & Peripheral Pin SOSCI/C2IND/RP4/RB4 (General)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
11PGED3/RP5/ASDA1/RB5I/OMultiplexed I/O & Peripheral Pin PGED3/RP5/ASDA1/RB5 (General)
12PGEC3/RP6/ASCL1/RB6I/OMultiplexed I/O & Peripheral Pin PGEC3/RP6/ASCL1/RB6 (General)
13RP7/INT0/RB7I/OMultiplexed I/O & Peripheral Pin RP7/INT0/RB7 (General)
14TDI/RA9I/OMultiplexed I/O & Peripheral Pin TDI/RA9 (General)
15AN13/RP19/RC3I/OMultiplexed I/O & Peripheral Pin AN13/RP19/RC3 (General)
16RP20/RC4I/OMultiplexed I/O & Peripheral Pin RP20/RC4 (General)
17RP21/RC5I/OMultiplexed I/O & Peripheral Pin RP21/RC5 (General)
18VSSGNDGround Reference Pin (VSS)
19VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
20RPI32/RA14I/OMultiplexed I/O & Peripheral Pin RPI32/RA14 (General)
21PGED3/RP5/ASDA1/RB5I/OMultiplexed I/O & Peripheral Pin PGED3/RP5/ASDA1/RB5 (General)
22PGEC3/RP6/ASCL1/RB6I/OMultiplexed I/O & Peripheral Pin PGEC3/RP6/ASCL1/RB6 (General)
23RP7/INT0/RB7I/OMultiplexed I/O & Peripheral Pin RP7/INT0/RB7 (General)
24RP8/SCL1(2)/RB8I/OMultiplexed I/O & Peripheral Pin RP8/SCL1(2)/RB8 (I2C)
25AVDD/VDDPowerPower Supply Input (AVDD/VDD — 2.0V to 3.6V)
26MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
27IO47I/OGPIO47 / SPICLK_P_DIFF / SUBSPICLK_P_DIFF
28IO33I/OGPIO33 / FSPIHD / SUBSPIHD / SPIIO4
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 18 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) - 4. Package Dimensions (D×E×A)
UQFN-28(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (18 figures · Page 1/2)
Showing 1–12 of 18 uncropped original figures for PIC24FJ32GP2 / PIC24FJ64GU2 / PIC24FJ64GP2
P5 · p05_fig01EXACT PACKAGE
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Pin Function(1) Pin Function(1)
Pin Function(1) Pin Function(1)
P6 · p06_fig01EXACT PACKAGE
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Pin Function(1) Pin Function(1)
Pin Function(1) Pin Function(1)
P7 · p07_fig01EXACT PACKAGE
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Pin Function(1) Pin Function(1)
Pin Function(1) Pin Function(1)
P1 · p01_fig01456×280px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — 16-Bit eXtreme Low-Power Microcontrollers with USB in Low Pin Count Packages
16-Bit eXtreme Low-Power Microcontrollers with USB in Low Pin Count Packages
P5 · p05_fig021775×1203px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Notes: 1. RPn and RPIn represent remappable pins for Peripheral Pin Select (PPS) functions. 2. Alternate pin assignments for I2C1 as determined by the I2C1SEL Configuration bit.
Notes: 1. RPn and RPIn represent remappable pins for Peripheral Pin Select (PPS) functions. 2. Alternate pin assignments for I2C1 as determined by the I2C1SEL Configuration bit.
P6 · p06_fig021775×1203px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Notes: 1. RPn and RPIn represent remappable pins for Peripheral Pin Select (PPS) functions. 2. Alternate pin assignments for I2C1 as determined by the I2C1SEL Configuration bit.
Notes: 1. RPn and RPIn represent remappable pins for Peripheral Pin Select (PPS) functions. 2. Alternate pin assignments for I2C1 as determined by the I2C1SEL Configuration bit.
P6 · p06_fig01P6
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Datasheet Page 6 (p06_fig01)
Datasheet Page 6 (p06_fig01)
P32 · p32_fig01836×422px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Figure 2-4. DC Bias Voltage vs. Capacitance Characteristics
Figure 2-4. DC Bias Voltage vs. Capacitance Characteristics
P33 · p33_fig01804×874px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Figure 2-5. Suggested Placement of the Oscillator Circuit
Figure 2-5. Suggested Placement of the Oscillator Circuit
P33 · p33_fig02845×926px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Figure 2-5. Suggested Placement of the Oscillator Circuit
Figure 2-5. Suggested Placement of the Oscillator Circuit
P33 · p33_fig02P33
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Datasheet Page 33 (p33_fig02)
Datasheet Page 33 (p33_fig02)
P737 · p737_fig011691×861px
PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) — Figure 27-2. WDT Block Diagram
Figure 27-2. WDT Block Diagram
Page 1 / 2 (18 extracted figures)

Technical Specifications & Part Details (PIC24FJ64GP202T-I/MV)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) is a 28-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.50 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.0V to 3.6V supply operation across -40°C to +125°C with integrated USB, UART, SPI, I2C, I2S, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.50 mm (A1=0.03 mm)
Package family: QFN (UQFN-28(4x4))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, I2S, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UQFN-28(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.50mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UQFN-28(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC24FJ64GP202T-I/MV (UQFN-28(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC24FJ64GP202T-I/MV (UQFN-28(4x4))?

Manufactured by MICROCHIP, the PIC24FJ64GP202T-I/MV is housed in a UQFN-28(4x4) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 (IO2: General Purpose Digital I/O Pin IO2), 3 (AN4/C1INB/RP2/SDA2/RB2: Multiplexed I/O & Peripheral Pin AN4/C1INB/RP2/SDA2/RB2 (I2C)), 4 (AN5/C1INA/RP3/SCL2/RB3: Multiplexed I/O & Peripheral Pin AN5/C1INA/RP3/SCL2/RB3 (I2C)), 5 (VSS: Ground Reference Pin (VSS)), 6 (OSCI/CLKI/C1IND/RA2: Multiplexed I/O & Peripheral Pin OSCI/CLKI/C1IND/RA2 (RTC/CLK)).

What are the IPC-7351B PCB Footprint dimensions for PIC24FJ64GP202T-I/MV?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC24FJ64GP202T-I/MV (UQFN-28(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC24FJ64GP202T-I/MV?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC24FJ64GP202T-I/MV (MICROCHIP, UQFN-28(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & PIC24FJ32GP2 / PIC24FJ64GU2 / PIC24FJ64GP2 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2IO2Digital_IOGeneral Purpose Digital I/O Pin IO2
3AN4/C1INB/RP2/SDA2/RB2Digital_IOSignal terminal AN4/C1INB/RP2/SDA2/RB2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: AN4/C1INB/RP2/SDA2/RB2. Supported peripheral buses: I2C.
4AN5/C1INA/RP3/SCL2/RB3Digital_IOSignal terminal AN5/C1INA/RP3/SCL2/RB3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: AN5/C1INA/RP3/SCL2/RB3. Supported peripheral buses: I2C.
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6OSCI/CLKI/C1IND/RA2Digital_IOSignal terminal OSCI/CLKI/C1IND/RA2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSCI/CLKI/C1IND/RA2. Supported peripheral buses: RTC/CLK.
7OSCO/CLKO/C2IND/RA3Digital_IOSignal terminal OSCO/CLKO/C2IND/RA3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSCO/CLKO/C2IND/RA3. Supported peripheral buses: RTC/CLK.
8SOSCI/C2IND/RP4/RB4Digital_IOSignal terminal SOSCI/C2IND/RP4/RB4 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SOSCI/C2IND/RP4/RB4. Supported peripheral buses: General.
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
11PGED3/RP5/ASDA1/RB5Digital_IOSignal terminal PGED3/RP5/ASDA1/RB5 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: PGED3/RP5/ASDA1/RB5. Supported peripheral buses: General.
12PGEC3/RP6/ASCL1/RB6Digital_IOSignal terminal PGEC3/RP6/ASCL1/RB6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: PGEC3/RP6/ASCL1/RB6. Supported peripheral buses: General.
13RP7/INT0/RB7Digital_IOSignal terminal RP7/INT0/RB7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP7/INT0/RB7. Supported peripheral buses: General.
14TDI/RA9Digital_IOSignal terminal TDI/RA9 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: TDI/RA9. Supported peripheral buses: General.
15AN13/RP19/RC3Digital_IOSignal terminal AN13/RP19/RC3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: AN13/RP19/RC3. Supported peripheral buses: General.
16RP20/RC4Digital_IOSignal terminal RP20/RC4 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP20/RC4. Supported peripheral buses: General.
17RP21/RC5Digital_IOSignal terminal RP21/RC5 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP21/RC5. Supported peripheral buses: General.
18VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
19VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
20RPI32/RA14Digital_IOSignal terminal RPI32/RA14 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RPI32/RA14. Supported peripheral buses: General.
21PGED3/RP5/ASDA1/RB5Digital_IOSignal terminal PGED3/RP5/ASDA1/RB5 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: PGED3/RP5/ASDA1/RB5. Supported peripheral buses: General.
22PGEC3/RP6/ASCL1/RB6Digital_IOSignal terminal PGEC3/RP6/ASCL1/RB6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: PGEC3/RP6/ASCL1/RB6. Supported peripheral buses: General.
23RP7/INT0/RB7Digital_IOSignal terminal RP7/INT0/RB7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP7/INT0/RB7. Supported peripheral buses: General.
24RP8/SCL1(2)/RB8Digital_IOSignal terminal RP8/SCL1(2)/RB8 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP8/SCL1(2)/RB8. Supported peripheral buses: I2C.
25AVDD/VDDPower_InPrimary positive power supply input (AVDD/VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
26MCLR#Digital_IOSignal terminal MCLR# (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
27IO47Digital_IOGPIO47 / SPICLK_P_DIFF / SUBSPICLK_P_DIFF
28IO33Digital_IOGPIO33 / FSPIHD / SUBSPIHD / SPIIO4
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.