JANTX1N6122A (DO-41) — Symbol, Footprint IPC-7351B & 3D STEP Model

JANTX1N6122A

MICROCHIPDO-41 · 2 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · JANTX1N6122A (DO-41)1A2KGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12E=4.20mm · Pitch e=0.50mmD=2.60mm-7-5-3-11357420-2-4mm
3. 3D CAD MODEL
Package Body: 4.20mm × 2.60mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (2/2)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1AI/OMultiplexed I/O & Peripheral Pin A (General)
2KI/OMultiplexed I/O & Peripheral Pin K (General)
PIN 1 A
I/O
Multiplexed I/O & Peripheral Pin A (General)
Design note: Signal terminal A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
JANTX1N6122A (DO-41) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
JANTX1N6122A (DO-41) - 2. Standard Pinout (Top View)
True package pinout (2 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
JANTX1N6122A (DO-41) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
JANTX1N6122A (DO-41) - 4. Package Dimensions (D×E×A)
DO-41 · 4.20×2.60mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
JANTX1N6122A (DO-41) - 5. Recommended Land Pattern
IPC-7351B Footprint (2 Pads)Expand ›
6. Application SchematicSCHEMATIC
JANTX1N6122A (DO-41) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for JANTXV1N6134 / JANTX1N6122A
P1 · p01_fig012080×2440px
JANTX1N6122A (DO-41) — T4-LDS-0277, Rev. 1 (121354) ©2013 Microsemi Corporation Page 1 of 6
T4-LDS-0277, Rev. 1 (121354) ©2013 Microsemi Corporation Page 1 of 6
P1 · p01_fig02193×615px
JANTX1N6122A (DO-41) — “B” Package
“B” Package
P2 · p02_fig012078×507px
JANTX1N6122A (DO-41) — PART NOMENCLATURE Applicable to entire series: JAN 1N6103 A (e3)
PART NOMENCLATURE Applicable to entire series: JAN 1N6103 A (e3)
P2 · p02_fig022078×430px
JANTX1N6122A (DO-41) — Voltage Tolerance A = Standard Blank =5% higher VC, 5% lower min. V(BR) and 5% lower IPP
Voltage Tolerance A = Standard Blank =5% higher VC, 5% lower min. V(BR) and 5% lower IPP
P2 · p02_fig032078×392px
JANTX1N6122A (DO-41) — T4-LDS-0277, Rev. 1 (121354) ©2013 Microsemi Corporation Page 2 of 6
T4-LDS-0277, Rev. 1 (121354) ©2013 Microsemi Corporation Page 2 of 6
P6 · p06_fig011170×504px
JANTX1N6122A (DO-41) — PACKAGE DIMENSIONS
PACKAGE DIMENSIONS
P6 · p06_fig01P6
JANTX1N6122A (DO-41) — Datasheet Page 6 (p06_fig01)
Datasheet Page 6 (p06_fig01)

Technical Specifications & Part Details (JANTX1N6122A)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:JANTX1N6122A (DO-41) is a 2-pin standard electronic & interconnect component featuring a 4.20 × 2.60 × 1.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.20 × 2.60 × 1.00 mm (A1=0.02 mm)
Package family: OTHER (DO-41)
Pin Count & Lead PitchN / e
2 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol2 auto-grouped pins
OK
IPC-7351B Land Pattern2 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DO-41)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.20 × 2.60 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
2P / 2Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DO-41
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — JANTX1N6122A (DO-41)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of JANTX1N6122A (DO-41)?

Manufactured by MICROCHIP, the JANTX1N6122A is housed in a DO-41 package with 2 pins and a 0.50 mm lead pitch. Key pins include: 1 (A: Multiplexed I/O & Peripheral Pin A (General)), 2 (K: Multiplexed I/O & Peripheral Pin K (General)).

What are the IPC-7351B PCB Footprint dimensions for JANTX1N6122A?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), JANTX1N6122A (DO-41) has a nominal body envelope of 2.60 × 4.20 mm, pitch e = 0.50 mm, and 2 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for JANTX1N6122A?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for JANTX1N6122A (MICROCHIP, DO-41) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (2 pins) & JANTXV1N6134 / JANTX1N6122A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ADigital_IOSignal terminal A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A. Supported peripheral buses: General.
2KDigital_IOSignal terminal K (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: K. Supported peripheral buses: General.