SMDB03CE3/TR7 (SO-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

SMDB03CE3/TR7

MICROCHIPSO-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SMDB03CE3/TR7 (SO-8)1122334488776655Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=0.02mm · Pitch e=1.27mmD=3.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 0.02mm × 3.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
11I/OMultiplexed I/O & Peripheral Pin 1 (General)
22I/OMultiplexed I/O & Peripheral Pin 2 (General)
33I/OMultiplexed I/O & Peripheral Pin 3 (General)
44I/OMultiplexed I/O & Peripheral Pin 4 (General)
55I/OMultiplexed I/O & Peripheral Pin 5 (General)
66I/OMultiplexed I/O & Peripheral Pin 6 (General)
77I/OMultiplexed I/O & Peripheral Pin 7 (General)
88I/OMultiplexed I/O & Peripheral Pin 8 (General)
PIN 1 1
I/O
Multiplexed I/O & Peripheral Pin 1 (General)
Design note: Signal terminal 1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 1. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SMDB03CE3/TR7 (SO-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SMDB03CE3/TR7 (SO-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SMDB03CE3/TR7 (SO-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SMDB03CE3/TR7 (SO-8) - 4. Package Dimensions (D×E×A)
SO-8 · 0.02×3.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
SMDB03CE3/TR7 (SO-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
SMDB03CE3/TR7 (SO-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for SMDB03CE3/TR
P1 · p01_fig012040×2536px
SMDB03CE3/TR7 (SO-8) — Microsemi Scottsdale Division Page 1 Copyright © 2005 11-11-2005 REV R
Microsemi Scottsdale Division Page 1 Copyright © 2005 11-11-2005 REV R
P1 · p01_fig02732×166px
SMDB03CE3/TR7 (SO-8) — S C O T T S D A L E D I V I S I O N
S C O T T S D A L E D I V I S I O N
P1 · p01_fig03310×250px
SMDB03CE3/TR7 (SO-8) — IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
P1 · p01_fig03P1
SMDB03CE3/TR7 (SO-8) — Datasheet Page 1 (p01_fig03)
Datasheet Page 1 (p01_fig03)
P2 · p02_fig012014×1557px
SMDB03CE3/TR7 (SO-8) — Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
P2 · p02_fig02732×166px
SMDB03CE3/TR7 (SO-8) — S C O T T S D A L E D I V I S I O N
S C O T T S D A L E D I V I S I O N
P2 · p02_fig03458×556px
SMDB03CE3/TR7 (SO-8) — Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
P2 · p02_fig04881×489px
SMDB03CE3/TR7 (SO-8) — Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
P2 · p02_fig052014×983px
SMDB03CE3/TR7 (SO-8) — Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
P2 · p02_fig06537×343px
SMDB03CE3/TR7 (SO-8) — Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC
Figure 1 Figure 2 Peak Pulse Power vs Pulse Time Pulse Wave Form OUTLINE AND SCHEMATIC

Technical Specifications & Part Details (SMDB03CE3/TR7)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SMDB03CE3/TR7 (SO-8) is a 8-pin standard electronic & interconnect component featuring a 0.02 × 3.90 × 1.50 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -55°C to +150°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
0.02 × 3.90 × 1.50 mm (A1=0.15 mm)
Package family: SOIC (SO-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SO-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
0.02 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.50mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SO-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SMDB03CE3/TR7 (SO-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SMDB03CE3/TR7 (SO-8)?

Manufactured by MICROCHIP, the SMDB03CE3/TR7 is housed in a SO-8 package with 8 pins and a 1.27 mm lead pitch. Key pins include: 1 (1: Multiplexed I/O & Peripheral Pin 1 (General)), 2 (2: Multiplexed I/O & Peripheral Pin 2 (General)), 3 (3: Multiplexed I/O & Peripheral Pin 3 (General)), 4 (4: Multiplexed I/O & Peripheral Pin 4 (General)), 5 (5: Multiplexed I/O & Peripheral Pin 5 (General)), 6 (6: Multiplexed I/O & Peripheral Pin 6 (General)).

What are the IPC-7351B PCB Footprint dimensions for SMDB03CE3/TR7?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SMDB03CE3/TR7 (SO-8) has a nominal body envelope of 3.90 × 0.02 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SMDB03CE3/TR7?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SMDB03CE3/TR7 (MICROCHIP, SO-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & SMDB03CE3/TR Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
11Digital_IOSignal terminal 1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 1. Supported peripheral buses: General.
22Digital_IOSignal terminal 2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 2. Supported peripheral buses: General.
33Digital_IOSignal terminal 3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 3. Supported peripheral buses: General.
44Digital_IOSignal terminal 4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 4. Supported peripheral buses: General.
55Digital_IOSignal terminal 5 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 5. Supported peripheral buses: General.
66Digital_IOSignal terminal 6 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 6. Supported peripheral buses: General.
77Digital_IOSignal terminal 7 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 7. Supported peripheral buses: General.
88Digital_IOSignal terminal 8 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 8. Supported peripheral buses: General.