KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — Symbol, Footprint IPC-7351B & 3D STEP Model

KSZ8041RNLU-TR

MICROCHIPVQFN-32_L5.0-W5.0-P0.50-TL-EP3.1 · 33 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1)1GND2VDDPLL 1.8_3VDDA 3.3_4RX-5RX+6TX-7TX+8XO9XI / REFCLK10REXT11MDIO12MDC13PHYAD014PHYAD115RXD1 / PHYAD16DUPLEX17VDDIO 3.3_33GND32RST#31SPEED30NWAYEN29CONFIG128CONFIG027NC26NC25TXD124TXD023TX_EN22NC21INTRP20ISO19REF_CLK18CONFIG2Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.827.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233E=5.00mm · Pitch e=0.50mmD=5.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.00mm × 5.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (33/33)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GNDGNDGround Reference Pin (GND)
2VDDPLL 1.8_PowerPower Supply Input (VDDPLL 1.8_ — 3.3V / 5.0V Standard Logic)
3VDDA 3.3_PowerPower Supply Input (VDDA 3.3_ — 3.3V / 5.0V Standard Logic)
4RX-I/OMultiplexed I/O & Peripheral Pin RX- (General)
5RX+I/OMultiplexed I/O & Peripheral Pin RX+ (General)
6TX-I/OMultiplexed I/O & Peripheral Pin TX- (General)
7TX+I/OMultiplexed I/O & Peripheral Pin TX+ (General)
8XOI/OMultiplexed I/O & Peripheral Pin XO (RTC/CLK)
9XI / REFCLKI/OMultiplexed I/O & Peripheral Pin XI / REFCLK (RTC/CLK)
10REXTI/OMultiplexed I/O & Peripheral Pin REXT (General)
11MDIOI/OMultiplexed I/O & Peripheral Pin MDIO (General)
12MDCI/OMultiplexed I/O & Peripheral Pin MDC (General)
13PHYAD0I/OMultiplexed I/O & Peripheral Pin PHYAD0 (General)
14PHYAD1I/OMultiplexed I/O & Peripheral Pin PHYAD1 (General)
15RXD1 / PHYAD2I/OMultiplexed I/O & Peripheral Pin RXD1 / PHYAD2 (UART)
16DUPLEXI/OMultiplexed I/O & Peripheral Pin DUPLEX (General)
17VDDIO 3.3_PowerPower Supply Input (VDDIO 3.3_ — 3.3V / 5.0V Standard Logic)
18CONFIG2I/OMultiplexed I/O & Peripheral Pin CONFIG2 (General)
19REF_CLKI/OMultiplexed I/O & Peripheral Pin REF_CLK (General)
20ISOI/OMultiplexed I/O & Peripheral Pin ISO (General)
21INTRPI/OMultiplexed I/O & Peripheral Pin INTRP (General)
22NCI/OMultiplexed I/O & Peripheral Pin NC (General)
23TX_ENI/OMultiplexed I/O & Peripheral Pin TX_EN (General)
24TXD0I/OMultiplexed I/O & Peripheral Pin TXD0 (UART)
25TXD1I/OMultiplexed I/O & Peripheral Pin TXD1 (UART)
26NCI/OMultiplexed I/O & Peripheral Pin NC (General)
27NCI/OMultiplexed I/O & Peripheral Pin NC (General)
28CONFIG0I/OMultiplexed I/O & Peripheral Pin CONFIG0 (General)
29CONFIG1I/OMultiplexed I/O & Peripheral Pin CONFIG1 (General)
30NWAYENI/OMultiplexed I/O & Peripheral Pin NWAYEN (General)
31SPEEDI/OMultiplexed I/O & Peripheral Pin SPEED (General)
32RST#I/OMultiplexed I/O & Peripheral Pin RST# (General)
33GNDGNDGround Reference Pin (GND)
PIN 1 GND
GND
Ground Reference Pin (GND)
Design note: Ground
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) - 2. Standard Pinout (Top View)
True package pinout (33 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) - 4. Package Dimensions (D×E×A)
VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1 · 5.00×5.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) - 5. Recommended Land Pattern
IPC-7351B Footprint (33 Pads)Expand ›
6. Application SchematicSCHEMATIC
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for KSZ8041
P1 · p01_fig01376×200px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — 10BASE-T/100BASE-TX Physical Layer Transceiver
10BASE-T/100BASE-TX Physical Layer Transceiver
P6 · p06_fig011174×1187px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — FIGURE 2-1: KSZ8041NL 32-QFN PIN ASSIGNMENT (TOP VIEW)
FIGURE 2-1: KSZ8041NL 32-QFN PIN ASSIGNMENT (TOP VIEW)
P6 · p06_fig01P6
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — Datasheet Page 6 (p06_fig01)
Datasheet Page 6 (p06_fig01)
P12 · p12_fig011779×2400px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — FIGURE 2-2: KSZ8041RNL 32-QFN PIN ASSIGNMENT (TOP VIEW)
FIGURE 2-2: KSZ8041RNL 32-QFN PIN ASSIGNMENT (TOP VIEW)
P27 · p27_fig011571×512px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — FIGURE 3-6: 25-MHZ CRYSTAL/OSCILLATOR REFERENCE CLOCK
FIGURE 3-6: 25-MHZ CRYSTAL/OSCILLATOR REFERENCE CLOCK
P28 · p28_fig011535×922px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — FIGURE 3-8: KSZ8041NL/RNL POWER AND GROUND CONNECTIONS
FIGURE 3-8: KSZ8041NL/RNL POWER AND GROUND CONNECTIONS
P28 · p28_fig01P28
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — Datasheet Page 28 (p28_fig01)
Datasheet Page 28 (p28_fig01)
P49 · p49_fig01783×1478px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — FIGURE 7-13: REFERENCE CIRCUITS FOR LED STRAPPING PINS
FIGURE 7-13: REFERENCE CIRCUITS FOR LED STRAPPING PINS
P52 · p52_fig011782×2306px
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — FIGURE 10-1: 32-LEAD QFN 5X5 PACKAGE
FIGURE 10-1: 32-LEAD QFN 5X5 PACKAGE
P52 · p52_fig01P52
KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) — Datasheet Page 52 (p52_fig01)
Datasheet Page 52 (p52_fig01)

Technical Specifications & Part Details (KSZ8041RNLU-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) is a 32-pin standard electronic & interconnect component featuring a 5.00 × 5.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 55°C to +150°C with integrated RTC/CLK, UART interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
55°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
6.25 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 5.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1)
Pin Count & Lead PitchN / e
32 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
RTC/CLK, UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol33 auto-grouped pins
OK
IPC-7351B Land Pattern33 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.10×3.10mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
33P / 33Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1)?

Manufactured by MICROCHIP, the KSZ8041RNLU-TR is housed in a VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1 package with 33 pins and a 0.50 mm lead pitch. Key pins include: 1 (GND: Ground Reference Pin (GND)), 2 (VDDPLL 1.8_: Power Supply Input (VDDPLL 1.8_ — 3.3V / 5.0V Standard Logic)), 3 (VDDA 3.3_: Power Supply Input (VDDA 3.3_ — 3.3V / 5.0V Standard Logic)), 4 (RX-: Multiplexed I/O & Peripheral Pin RX- (General)), 5 (RX+: Multiplexed I/O & Peripheral Pin RX+ (General)), 6 (TX-: Multiplexed I/O & Peripheral Pin TX- (General)).

What are the IPC-7351B PCB Footprint dimensions for KSZ8041RNLU-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), KSZ8041RNLU-TR (VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) has a nominal body envelope of 5.00 × 5.00 mm, pitch e = 0.50 mm, and 33 copper pads plus a central exposed thermal pad (EPAD) of 3.10 × 3.10 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for KSZ8041RNLU-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for KSZ8041RNLU-TR (MICROCHIP, VQFN-32_L5.0-W5.0-P0.50-TL-EP3.1) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (33 pins) & KSZ8041 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
2VDDPLL 1.8_Power_InPrimary positive power supply input (VDDPLL 1.8_) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
3VDDA 3.3_Power_InPrimary positive power supply input (VDDA 3.3_) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
4RX-Digital_IOSignal terminal RX- (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RX-. Supported peripheral buses: General.
5RX+Digital_IOSignal terminal RX+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RX+. Supported peripheral buses: General.
6TX-Digital_IOSignal terminal TX- (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TX-. Supported peripheral buses: General.
7TX+Digital_IOSignal terminal TX+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TX+. Supported peripheral buses: General.
8XONCSignal terminal XO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XO. Supported peripheral buses: RTC/CLK.
9XI / REFCLKDigital_IOSignal terminal XI / REFCLK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XI / REFCLK. Supported peripheral buses: RTC/CLK.
10REXTDigital_IOSignal terminal REXT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: REXT. Supported peripheral buses: General.
11MDIODigital_IOSignal terminal MDIO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MDIO. Supported peripheral buses: General.
12MDCDigital_IOSignal terminal MDC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MDC. Supported peripheral buses: General.
13PHYAD0Digital_IOSignal terminal PHYAD0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PHYAD0. Supported peripheral buses: General.
14PHYAD1Digital_IOSignal terminal PHYAD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PHYAD1. Supported peripheral buses: General.
15RXD1 / PHYAD2Digital_IOSignal terminal RXD1 / PHYAD2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXD1 / PHYAD2. Supported peripheral buses: UART.
16DUPLEXDigital_IOSignal terminal DUPLEX (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DUPLEX. Supported peripheral buses: General.
17VDDIO 3.3_Power_InPrimary positive power supply input (VDDIO 3.3_) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
18CONFIG2Digital_IOSignal terminal CONFIG2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CONFIG2. Supported peripheral buses: General.
19REF_CLKDigital_IOSignal terminal REF_CLK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: REF_CLK. Supported peripheral buses: General.
20ISODigital_IOSignal terminal ISO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ISO. Supported peripheral buses: General.
21INTRPDigital_IOSignal terminal INTRP (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: INTRP. Supported peripheral buses: General.
22NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
23TX_ENDigital_IOSignal terminal TX_EN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TX_EN. Supported peripheral buses: General.
24TXD0Digital_IOSignal terminal TXD0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD0. Supported peripheral buses: UART.
25TXD1Digital_IOSignal terminal TXD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD1. Supported peripheral buses: UART.
26NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
27NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
28CONFIG0Digital_IOSignal terminal CONFIG0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CONFIG0. Supported peripheral buses: General.
29CONFIG1Digital_IOSignal terminal CONFIG1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CONFIG1. Supported peripheral buses: General.
30NWAYENDigital_IOSignal terminal NWAYEN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NWAYEN. Supported peripheral buses: General.
31SPEEDDigital_IOSignal terminal SPEED (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SPEED. Supported peripheral buses: General.
32RST#Digital_IOSignal terminal RST# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RST#. Supported peripheral buses: General.
33GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.