PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC16LF1509-E/ML

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC16LF1509-E/ML (QFN-20-EP(4x4))1#MCLR/VPP/RA2RC53RC44RC35RC66RC77RB78RB69RB510RB411RC221EP20RA419RA518VDD17VSS16RA0/ICSPDAT15RA1/ICSPCLK14RA213RC012RC1Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1#MCLR/VPP/RA3I/OMultiplexed I/O & Peripheral Pin #MCLR/VPP/RA3 (General)
2RC5I/OMultiplexed I/O & Peripheral Pin RC5 (General)
3RC4I/OMultiplexed I/O & Peripheral Pin RC4 (General)
4RC3I/OMultiplexed I/O & Peripheral Pin RC3 (General)
5RC6I/OMultiplexed I/O & Peripheral Pin RC6 (General)
6RC7I/OMultiplexed I/O & Peripheral Pin RC7 (General)
7RB7I/OMultiplexed I/O & Peripheral Pin RB7 (General)
8RB6I/OMultiplexed I/O & Peripheral Pin RB6 (General)
9RB5I/OMultiplexed I/O & Peripheral Pin RB5 (General)
10RB4I/OMultiplexed I/O & Peripheral Pin RB4 (General)
11RC2I/OMultiplexed I/O & Peripheral Pin RC2 (General)
12RC1I/OMultiplexed I/O & Peripheral Pin RC1 (General)
13RC0I/OMultiplexed I/O & Peripheral Pin RC0 (General)
14RA2I/OMultiplexed I/O & Peripheral Pin RA2 (General)
15RA1/ICSPCLKI/OMultiplexed I/O & Peripheral Pin RA1/ICSPCLK (General)
16RA0/ICSPDATI/OMultiplexed I/O & Peripheral Pin RA0/ICSPDAT (General)
17VSSGNDGround Reference Pin (VSS)
18VDDPowerPower Supply Input (VDD — 1.8V to 3.6V)
19RA5I/OMultiplexed I/O & Peripheral Pin RA5 (General)
20RA4I/OMultiplexed I/O & Peripheral Pin RA4 (General)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 #MCLR/VPP/RA3
I/O
Multiplexed I/O & Peripheral Pin #MCLR/VPP/RA3 (General)
Design note: Signal terminal #MCLR/VPP/RA3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: #MCLR/VPP/RA3. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 18 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC16LF1509-E/ML (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC16LF1509-E/ML (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC16LF1509-E/ML (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC16LF1509-E/ML (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC16LF1509-E/ML (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC16LF1509-E/ML (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (18 figures · Page 1/2)
Showing 1–12 of 18 uncropped original figures for PIC16LF1509
P1 · p01_fig01377×200px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — 20-Pin Flash, 8-Bit Microcontrollers with XLP Technology
20-Pin Flash, 8-Bit Microcontrollers with XLP Technology
P83 · p83_fig011777×1109px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — FIGURE 8-1: WAKE-UP FROM SLEEP THROUGH INTERRUPT
FIGURE 8-1: WAKE-UP FROM SLEEP THROUGH INTERRUPT
P91 · p91_fig011777×1258px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — FIGURE 10-2: FLASH PROGRAM MEMORY READ CYCLE EXECUTION
FIGURE 10-2: FLASH PROGRAM MEMORY READ CYCLE EXECUTION
P251 · p251_fig011494×419px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Note: The Timer2 postscaler has no effect on the PWM operation.
Note: The Timer2 postscaler has no effect on the PWM operation.
P251 · p251_fig021714×510px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Equation 23-3 is used to calculate the PWM duty cycle ratio.
Equation 23-3 is used to calculate the PWM duty cycle ratio.
P251 · p251_fig03867×457px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Duty Cycle Ratio PWMxDCH:PWMxDCL<7:6>   4 PR2 1 +   ----------------------------------------------------------------------------------- =
Duty Cycle Ratio PWMxDCH:PWMxDCL<7:6>   4 PR2 1 +   ----------------------------------------------------------------------------------- =
P251 · p251_fig04867×480px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Figure 23-2 shows a waveform of the PWM signal when the duty cycle is set for the smallest possible pulse. FIGURE 23-2: PWM OUTPUT
Figure 23-2 shows a waveform of the PWM signal when the duty cycle is set for the smallest possible pulse. FIGURE 23-2: PWM OUTPUT
P251 · p251_fig052023×1188px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Figure 23-2 shows a waveform of the PWM signal when the duty cycle is set for the smallest possible pulse. FIGURE 23-2: PWM OUTPUT
Figure 23-2 shows a waveform of the PWM signal when the duty cycle is set for the smallest possible pulse. FIGURE 23-2: PWM OUTPUT
P251 · p251_fig02P251
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Datasheet Page 251 (p251_fig02)
Datasheet Page 251 (p251_fig02)
P292 · p292_fig011778×1166px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — FIGURE 27-2: PICkit™ PROGRAMMER STYLE CONNECTOR INTERFACE
FIGURE 27-2: PICkit™ PROGRAMMER STYLE CONNECTOR INTERFACE
P292 · p292_fig021778×1316px
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — FIGURE 27-3: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
FIGURE 27-3: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
P292 · p292_fig02P292
PIC16LF1509-E/ML (QFN-20-EP(4x4)) — Datasheet Page 292 (p292_fig02)
Datasheet Page 292 (p292_fig02)
Page 1 / 2 (18 extracted figures)

Technical Specifications & Part Details (PIC16LF1509-E/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC16LF1509-E/ML (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, ADC, DAC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.80 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.50×2.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC16LF1509 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC16LF1509-E/ML (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC16LF1509-E/ML (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the PIC16LF1509-E/ML is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (#MCLR/VPP/RA3: Multiplexed I/O & Peripheral Pin #MCLR/VPP/RA3 (General)), 2 (RC5: Multiplexed I/O & Peripheral Pin RC5 (General)), 3 (RC4: Multiplexed I/O & Peripheral Pin RC4 (General)), 4 (RC3: Multiplexed I/O & Peripheral Pin RC3 (General)), 5 (RC6: Multiplexed I/O & Peripheral Pin RC6 (General)), 6 (RC7: Multiplexed I/O & Peripheral Pin RC7 (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC16LF1509-E/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC16LF1509-E/ML (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.50 × 2.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC16LF1509-E/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC16LF1509-E/ML (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & PIC16LF1509 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1#MCLR/VPP/RA3Digital_IOSignal terminal #MCLR/VPP/RA3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: #MCLR/VPP/RA3. Supported peripheral buses: General.
2RC5Digital_IOSignal terminal RC5 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC5. Supported peripheral buses: General.
3RC4Digital_IOSignal terminal RC4 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC4. Supported peripheral buses: General.
4RC3Digital_IOSignal terminal RC3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC3. Supported peripheral buses: General.
5RC6Digital_IOSignal terminal RC6 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC6. Supported peripheral buses: General.
6RC7Digital_IOSignal terminal RC7 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC7. Supported peripheral buses: General.
7RB7Digital_IOSignal terminal RB7 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB7. Supported peripheral buses: General.
8RB6Digital_IOSignal terminal RB6 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB6. Supported peripheral buses: General.
9RB5Digital_IOSignal terminal RB5 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB5. Supported peripheral buses: General.
10RB4Digital_IOSignal terminal RB4 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RB4. Supported peripheral buses: General.
11RC2Digital_IOSignal terminal RC2 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC2. Supported peripheral buses: General.
12RC1Digital_IOSignal terminal RC1 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC1. Supported peripheral buses: General.
13RC0Digital_IOSignal terminal RC0 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RC0. Supported peripheral buses: General.
14RA2Digital_IOSignal terminal RA2 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA2. Supported peripheral buses: General.
15RA1/ICSPCLKDigital_IOSignal terminal RA1/ICSPCLK (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA1/ICSPCLK. Supported peripheral buses: General.
16RA0/ICSPDATDigital_IOSignal terminal RA0/ICSPDAT (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA0/ICSPDAT. Supported peripheral buses: General.
17VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
18VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 3.6V domain (Max rating: 3.6V).
19RA5Digital_IOSignal terminal RA5 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA5. Supported peripheral buses: General.
20RA4Digital_IOSignal terminal RA4 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA4. Supported peripheral buses: General.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.