PIC18LF2480-I/SO (SOIC-28-300mil) — Schematic Symbol, IPC-7351B Footprint & 3D STEP Model

Q: What is the Pinout and operating voltage specification of PIC18LF2480-I/SO (SOIC-28-300mil)?

Manufactured by MICROCHIP, the PIC18LF2480-I/SO is housed in a SOIC-28-300mil package with 28 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.0V to 5.5V. Key pins include: 1 (MCLR#/VPP/RE3: Multiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)), 2 (RA0/AN0: Multiplexed I/O & Peripheral Pin RA0/AN0 (General)), 3 (RA1/AN1: Multiplexed I/O & Peripheral Pin RA1/AN1 (General)), 4 (RA2/AN2/VREF-: Multiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)), 5 (RA3/AN3/VREF+: Multiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)), 6 (RA4/T0CKI: Multiplexed I/O & Peripheral Pin RA4/T0CKI (General)).

Q: What are the IPC-7351B PCB Footprint dimensions for PIC18LF2480-I/SO?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF2480-I/SO (SOIC-28-300mil) has a nominal body envelope of 7.50 × 17.90 mm, pitch e = 1.27 mm, and 28 copper pads.

Q: Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF2480-I/SO?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF2480-I/SO (MICROCHIP, SOIC-28-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

1. SYMBOL

2. 2D FOOTPRINT

3. 3D CAD MODEL

Package Body: 7.50mm × 17.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D

Pin	Symbol	Type	Function (EN)
1	MCLR#/VPP/RE3	I/O	Multiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)
2	RA0/AN0	I/O	Multiplexed I/O & Peripheral Pin RA0/AN0 (General)
3	RA1/AN1	I/O	Multiplexed I/O & Peripheral Pin RA1/AN1 (General)
4	RA2/AN2/VREF-	Analog	Multiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)
5	RA3/AN3/VREF+	Analog	Multiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)
6	RA4/T0CKI	I/O	Multiplexed I/O & Peripheral Pin RA4/T0CKI (General)
7	RA5/AN4/SS#/HLVDIN	I/O	Multiplexed I/O & Peripheral Pin RA5/AN4/SS#/HLVDIN (General)
8	VSS	GND	Ground Reference Pin (VSS)
9	OSC1/CLKI/RA7	I/O	Multiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)
10	OSC2/CLKO/RA6	I/O	Multiplexed I/O & Peripheral Pin OSC2/CLKO/RA6 (RTC/CLK)
11	RC0/T1OSO/T13CKI	I/O	Multiplexed I/O & Peripheral Pin RC0/T1OSO/T13CKI (General)
12	RC1/T1OSI	I/O	Multiplexed I/O & Peripheral Pin RC1/T1OSI (General)
13	RC2/CCP1	I/O	Multiplexed I/O & Peripheral Pin RC2/CCP1 (General)
14	RC3/SCK/SCL	I/O	Multiplexed I/O & Peripheral Pin RC3/SCK/SCL (SPI, I2C)
15	RC4/SDI/SDA	I/O	Multiplexed I/O & Peripheral Pin RC4/SDI/SDA (I2C)
16	RC5/SDO	I/O	Multiplexed I/O & Peripheral Pin RC5/SDO (General)
17	RC6/TX/CK	I/O	Multiplexed I/O & Peripheral Pin RC6/TX/CK (General)
18	RC7/RX/DT	I/O	Multiplexed I/O & Peripheral Pin RC7/RX/DT (General)
19	VSS	GND	Ground Reference Pin (VSS)
20	VDD	Power	Power Supply Input (VDD — 2.0V to 5.5V)
21	RB0/INT0/AN10	I/O	Multiplexed I/O & Peripheral Pin RB0/INT0/AN10 (General)
22	RB1/INT1/AN8	I/O	Multiplexed I/O & Peripheral Pin RB1/INT1/AN8 (General)
23	RB2/INT2/CANTX	I/O	Multiplexed I/O & Peripheral Pin RB2/INT2/CANTX (CAN)
24	RB3/CANRX	I/O	Multiplexed I/O & Peripheral Pin RB3/CANRX (CAN)
25	RB4/KBI0/AN9	I/O	Multiplexed I/O & Peripheral Pin RB4/KBI0/AN9 (General)
26	RB5/KBI1/PGM	I/O	Multiplexed I/O & Peripheral Pin RB5/KBI1/PGM (General)
27	RB6/KBI2/PGC	I/O	Multiplexed I/O & Peripheral Pin RB6/KBI2/PGC (General)
28	RB7/KBI3/PGD	I/O	Multiplexed I/O & Peripheral Pin RB7/KBI3/PGD (General)

PIN 1 MCLR#/VPP/RE3

I/O

Multiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)

Design note: Signal terminal MCLR#/VPP/RE3 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: MCLR#/VPP/RE3. Supported peripheral buses: General.

IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen

1. Realistic 3D PackageREPRESENTATIVE

PIC18LF2480-I/SO (SOIC-28-300mil) - 1. Realistic 3D Package

Detailed solid 3D bodyExpand ›

2. Standard Pinout (Top View)CLEANROOM PINOUT

PIC18LF2480-I/SO (SOIC-28-300mil) - 2. Standard Pinout (Top View)

True package pinout (28 pins)Expand ›

3. Original Datasheet PinoutPDF PINOUT

PIC18LF2480-I/SO (SOIC-28-300mil) - 3. Original Datasheet Pinout

Uncropped datasheet pin diagramExpand ›

4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS

PIC18LF2480-I/SO (SOIC-28-300mil) - 4. Package Dimensions (D×E×A)

SOIC-28-300mil · 7.50×17.90mm · Pitch 1.27mmExpand ›

5. Recommended Land PatternLAND PATTERN

PIC18LF2480-I/SO (SOIC-28-300mil) - 5. Recommended Land Pattern

IPC-7351B Footprint (28 Pads)Expand ›

6. Application SchematicSCHEMATIC

PIC18LF2480-I/SO (SOIC-28-300mil) - 6. Application Schematic

Typical Application SchematicExpand ›

Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)

Showing 1–11 of 11 uncropped original figures for PIC18LF2480

P2 · p02_fig011777×1640px

PIC18LF2480-I/SO (SOIC-28-300mil) — DS39637D-page 2 © 2009 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc

DS39637D-page 2 © 2009 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc

P2 · p02_fig02788×285px

PIC18LF2480-I/SO (SOIC-28-300mil) — DS39637D-page 2 © 2009 Microchip Technology Inc.

P171 · p171_fig011537×930px

FIGURE 16-2: COMPARE MODE OPERATION BLOCK DIAGRAM

P195 · p195_fig011777×938px

FIGURE 18-2: SPI MASTER/SLAVE CONNECTION

P198 · p198_fig011777×1060px

FIGURE 18-5: SPI MODE WAVEFORM (SLAVE MODE WITH CKE = 0) SS SCK (CKP = 0 SCK (CKP = 1 CKE = 0) Write to SSPBUF

P198 · p198_fig021777×1096px

FIGURE 18-6: SPI MODE WAVEFORM (SLAVE MODE WITH CKE = 1) SS SCK (CKP = 0 SCK (CKP = 1 CKE = 1) Write to SSPBUF

P198 · p198_fig01P198

Datasheet Page 198 (p198_fig01)

P459 · p459_fig021777×817px

PIC18LF2480-I/SO (SOIC-28-300mil) — © 2009 Microchip Technology Inc. DS39637D-page 459 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spe

© 2009 Microchip Technology Inc. DS39637D-page 459 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spe

P462 · p462_fig011778×2735px

PIC18LF2480-I/SO (SOIC-28-300mil) — PIC18F2480/2580/4480/4580 - 28-Lead Plastic Small Outline (SO) - Wide, 7.50 mm Body [SOIC] - http://www.microchip.com/packaging | PIC18F2480/2580/4480/4580 | DS39637D-page 462 © 2009 Microchip Technology Inc. | dêÜè nóÜ§•îé qûÜóó m¶•óîüê

PIC18F2480/2580/4480/4580 - 28-Lead Plastic Small Outline (SO) - Wide, 7.50 mm Body [SOIC] - http://www.microchip.com/packaging | PIC18F2480/2580/4480/4580 | DS39637D-page 462 © 2009 Microchip Technology Inc. | dêÜè nóÜ§•îé qûÜóó m¶•óîüê

P462 · p462_fig01P462

Datasheet Page 462 (p462_fig01)

P459 · p459_fig01All Packages in PDF

PIC18LF2480-I/SO (SOIC-28-300mil) — 28-Lead SOIC | XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXX | YYWWNNN | Example | PIC18F2580-E/SO | 0910017 | 28-Lead QFN | XXXXXXXX XXXXXXXX YYWWNNN | Example | 18F2580 -I/ML 0910017 | 3 e | 3 e

Technical Specifications & Part Details (PIC18LF2480-I/SO)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)

Standard Electronic & Interconnect Component

Detailed Overview:PIC18LF2480-I/SO (SOIC-28-300mil) is a 28-pin standard electronic & interconnect component featuring a 17.90 × 7.50 × 2.70 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.0V to 5.5V supply operation across -10°C to +70°C with integrated UART, SPI, I2C, ADC, PWM, CAN, RTC/CLK interfaces.

Operating Supply VoltageV_CC / V_DD

2.0V to 5.5V

Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins

Ambient Operating TemperatureT_A

-10°C to +70°C

Industrial temperature grade; T_J(max) = +125°C

Clock / RF Operating Frequencyf_CLK / f_RF

32 kHz

Extracted from authoritative PDF specification tables

Current & Power RatingI_OUT / I_CC

I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA

Observe per-pin absolute maximum current limits

Package Envelope (D × E × A)D × E × A

17.90 × 7.50 × 2.70 mm (A1=0.20 mm)

Package family: SOIC (SOIC-28-300mil)

Pin Count & Lead PitchN / e

28 Pins | Pitch e = 1.27 mm (50.0 mil)

Normalized to Center-to-Center Span C per IPC-7351B

Integrated Peripheral InterfacesBuses

UART, SPI, I2C, ADC, PWM, CAN, RTC/CLK

Cross-linked with 4D Pinout & Schematic Symbol

Reflow & Moisture SensitivityIPC / MSL

IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3

60% windowed solder paste stencil on thermal EPAD

Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.

Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export

5/5 PASS

IEEE-315 Symbol28 auto-grouped pins

IPC-7351B Land Pattern28 pads · Pitch 1.27mm

IPC-7525 60% Solder PasteReflow 1:1 Standard

DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm

3D STEP AP214 & GLBAligned coordinate origin (0,0,0)

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet

5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-28-300mil)

Extracted from Datasheet & IPC-7351B Normalized

Package Body (D × E)Nominal

17.90 × 7.50 mm

Height (A) & Pitch (e)IPC-7351B

A=2.70mm · e=1.27mm

Pad Size (W × L)Level B

0.60 × 1.90 mm

Pins / Total PadsTopology

28P / 28Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives

DFM READY

Designator / Replacement MPN	Value / Package	Function & PCB Layout Rule
N/A BOM	Per application circuit SOIC-28-300mil	Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18LF2480-I/SO (SOIC-28-300mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats

IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18LF2480-I/SO (SOIC-28-300mil)?

Manufactured by MICROCHIP, the PIC18LF2480-I/SO is housed in a SOIC-28-300mil package with 28 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.0V to 5.5V. Key pins include: 1 (MCLR#/VPP/RE3: Multiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)), 2 (RA0/AN0: Multiplexed I/O & Peripheral Pin RA0/AN0 (General)), 3 (RA1/AN1: Multiplexed I/O & Peripheral Pin RA1/AN1 (General)), 4 (RA2/AN2/VREF-: Multiplexed I/O & Peripheral Pin RA2/AN2/VREF- (General)), 5 (RA3/AN3/VREF+: Multiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)), 6 (RA4/T0CKI: Multiplexed I/O & Peripheral Pin RA4/T0CKI (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC18LF2480-I/SO?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF2480-I/SO (SOIC-28-300mil) has a nominal body envelope of 7.50 × 17.90 mm, pitch e = 1.27 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF2480-I/SO?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF2480-I/SO (MICROCHIP, SOIC-28-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & PIC18LF2480 Family VariantsExpand static table

Pin #	Signal Name	Electrical Type	Functional Description & Design Notes
1	MCLR#/VPP/RE3	Digital_IO	Signal terminal MCLR#/VPP/RE3 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: MCLR#/VPP/RE3. Supported peripheral buses: General.
2	RA0/AN0	Digital_IO	Signal terminal RA0/AN0 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA0/AN0. Supported peripheral buses: General.
3	RA1/AN1	Digital_IO	Signal terminal RA1/AN1 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA1/AN1. Supported peripheral buses: General.
4	RA2/AN2/VREF-	Analog	Signal terminal RA2/AN2/VREF- (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA2/AN2/VREF-. Supported peripheral buses: General.
5	RA3/AN3/VREF+	Analog	Signal terminal RA3/AN3/VREF+ (Analog, 2.0V to 5.5V domain). Multiplexed alternate functions: RA3/AN3/VREF+. Supported peripheral buses: General.
6	RA4/T0CKI	Digital_IO	Signal terminal RA4/T0CKI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA4/T0CKI. Supported peripheral buses: General.
7	RA5/AN4/SS#/HLVDIN	Digital_IO	Signal terminal RA5/AN4/SS#/HLVDIN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RA5/AN4/SS#/HLVDIN. Supported peripheral buses: General.
8	VSS	GND	0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
9	OSC1/CLKI/RA7	Digital_IO	Signal terminal OSC1/CLKI/RA7 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC1/CLKI/RA7. Supported peripheral buses: RTC/CLK.
10	OSC2/CLKO/RA6	Digital_IO	Signal terminal OSC2/CLKO/RA6 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: OSC2/CLKO/RA6. Supported peripheral buses: RTC/CLK.
11	RC0/T1OSO/T13CKI	Digital_IO	Signal terminal RC0/T1OSO/T13CKI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC0/T1OSO/T13CKI. Supported peripheral buses: General.
12	RC1/T1OSI	Digital_IO	Signal terminal RC1/T1OSI (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC1/T1OSI. Supported peripheral buses: General.
13	RC2/CCP1	Digital_IO	Signal terminal RC2/CCP1 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC2/CCP1. Supported peripheral buses: General.
14	RC3/SCK/SCL	Digital_IO	Signal terminal RC3/SCK/SCL (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC3/SCK/SCL. Supported peripheral buses: SPI, I2C.
15	RC4/SDI/SDA	Digital_IO	Signal terminal RC4/SDI/SDA (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC4/SDI/SDA. Supported peripheral buses: I2C.
16	RC5/SDO	Digital_IO	Signal terminal RC5/SDO (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC5/SDO. Supported peripheral buses: General.
17	RC6/TX/CK	Digital_IO	Signal terminal RC6/TX/CK (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC6/TX/CK. Supported peripheral buses: General.
18	RC7/RX/DT	Digital_IO	Signal terminal RC7/RX/DT (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
19	VSS	GND	0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
20	VDD	Power_In	Primary positive power supply input (VDD) operating in the 2.0V to 5.5V domain (Max rating: 5.5V).
21	RB0/INT0/AN10	Digital_IO	Signal terminal RB0/INT0/AN10 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB0/INT0/AN10. Supported peripheral buses: General.
22	RB1/INT1/AN8	Digital_IO	Signal terminal RB1/INT1/AN8 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB1/INT1/AN8. Supported peripheral buses: General.
23	RB2/INT2/CANTX	RF_50Ohm	Signal terminal RB2/INT2/CANTX (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB2/INT2/CANTX. Supported peripheral buses: CAN.
24	RB3/CANRX	Digital_IO	Signal terminal RB3/CANRX (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB3/CANRX. Supported peripheral buses: CAN.
25	RB4/KBI0/AN9	Digital_IO	Signal terminal RB4/KBI0/AN9 (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB4/KBI0/AN9. Supported peripheral buses: General.
26	RB5/KBI1/PGM	Digital_IO	Signal terminal RB5/KBI1/PGM (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB5/KBI1/PGM. Supported peripheral buses: General.
27	RB6/KBI2/PGC	Digital_IO	Signal terminal RB6/KBI2/PGC (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB6/KBI2/PGC. Supported peripheral buses: General.
28	RB7/KBI3/PGD	Digital_IO	Signal terminal RB7/KBI3/PGD (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: RB7/KBI3/PGD. Supported peripheral buses: General.

4D Studio: PIC18LF2480-I/SO Permalink: /part/C219844 MICROCHIP SOIC-28-300mil All Packages All Manufacturers