25AA640AT-I/MNY (TDFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

25AA640AT-I/MNY

MICROCHIPTDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 25AA640AT-I/MNY (TDFN-8-EP(2x3))11 (high)2SO3WP4VSS5SI9EP8VCC7HOLD6SCKGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
11 (high)I/OMultiplexed I/O & Peripheral Pin 1 (high) (General)
2SOI/OMultiplexed I/O & Peripheral Pin SO (General)
3WPI/OMultiplexed I/O & Peripheral Pin WP (General)
4VSSGNDGround Reference Pin (VSS)
5SII/OMultiplexed I/O & Peripheral Pin SI (General)
6SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
7HOLDI/OMultiplexed I/O & Peripheral Pin HOLD (General)
8VCCPowerPower Supply Input (VCC — 1.8V to 5.5V)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 1 (high)
I/O
Multiplexed I/O & Peripheral Pin 1 (high) (General)
Design note: Signal terminal 1 (high) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: 1 (high). Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
25AA640AT-I/MNY (TDFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
25AA640AT-I/MNY (TDFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
25AA640AT-I/MNY (TDFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
25AA640AT-I/MNY (TDFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
TDFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
25AA640AT-I/MNY (TDFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
25AA640AT-I/MNY (TDFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for 25AA640AT / 25LC640A / 25AA640A
P1 · p01_fig01376×200px
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — 64K SPI Bus Serial EEPROM
64K SPI Bus Serial EEPROM
P1 · p01_fig02867×815px
25AA640AT-I/MNY (TDFN-8-EP(2x3)) —  2003-2013 Microchip Technology Inc. DS21830F-page 1
 2003-2013 Microchip Technology Inc. DS21830F-page 1
P1 · p01_fig02P1
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P14 · p14_fig011777×2451px
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — DS21830F-page 14  2003-2013 Microchip Technology Inc. | 4.0 PACKAGING INFORMATION 4.1 Package Marking Information | 8-Lead MSOP (150 mil) Example: | XXXXXT YWWNNN | 5LCAI 7281L7 | T/XXXNNN XXXXXXXX | YYWW | 8-Lead PDIP | 8-Lead SOIC | XX/X
DS21830F-page 14  2003-2013 Microchip Technology Inc. | 4.0 PACKAGING INFORMATION 4.1 Package Marking Information | 8-Lead MSOP (150 mil) Example: | XXXXXT YWWNNN | 5LCAI 7281L7 | T/XXXNNN XXXXXXXX | YYWW | 8-Lead PDIP | 8-Lead SOIC | XX/X
P14 · p14_fig01P14
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P33 · p33_fig011777×1220px
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — 25AA640A/25LC640A | PRODUCT IDENTIFICATION SYSTEM | To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. | PART NO. X /XX | Package Tape & Reel Device | Device: 25AA640A = 25LC640A =
25AA640A/25LC640A | PRODUCT IDENTIFICATION SYSTEM | To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. | PART NO. X /XX | Package Tape & Reel Device | Device: 25AA640A = 25LC640A =
P33 · p33_fig01P33
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — Datasheet Page 33 (p33_fig01)
Datasheet Page 33 (p33_fig01)
P23 · p23_fig01All Packages in PDF
25AA640AT-I/MNY (TDFN-8-EP(2x3)) — PACKAGE_DIMENSIONS — 25AA640A-E/MS (MSOP-8)
PACKAGE_DIMENSIONS — 25AA640A-E/MS (MSOP-8)

Technical Specifications & Part Details (25AA640AT-I/MNY)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:25AA640AT-I/MNY (TDFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 5.5V supply operation across -40°C to +125°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
10 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 1.00 mm (A1=0.03 mm)
Package family: DFN (TDFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — 25AA640AT / 25LC640A / 25AA640A (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TDFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 25AA640AT-I/MNY (TDFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 25AA640AT-I/MNY (TDFN-8-EP(2x3))?

Manufactured by MICROCHIP, the 25AA640AT-I/MNY is housed in a TDFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (1 (high): Multiplexed I/O & Peripheral Pin 1 (high) (General)), 2 (SO: Multiplexed I/O & Peripheral Pin SO (General)), 3 (WP: Multiplexed I/O & Peripheral Pin WP (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (SI: Multiplexed I/O & Peripheral Pin SI (General)), 6 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)).

What are the IPC-7351B PCB Footprint dimensions for 25AA640AT-I/MNY?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 25AA640AT-I/MNY (TDFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 25AA640AT-I/MNY?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 25AA640AT-I/MNY (MICROCHIP, TDFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & 25AA640AT / 25LC640A / 25AA640A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
11 (high)Digital_IOSignal terminal 1 (high) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: 1 (high). Supported peripheral buses: General.
2SODigital_IOSignal terminal SO (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
3WPDigital_IOSignal terminal WP (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5SIDigital_IOSignal terminal SI (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
6SCKDigital_IOSignal terminal SCK (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
7HOLDDigital_IOSignal terminal HOLD (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: HOLD. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.