ChipDocs.org
⌘K
2284 PARTSUpload PDF
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — Symbol, Footprint IPC-7351B & 3D STEP Model

ESP32-C6-DEVKITC-1-N8

ESPRESSIFID: C20554022COMM-TH_ESP32-C6-DEVKITC-1-N8 · 32 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8)13V32RST3GPIO44GPIO55GPIO66GPIO77GPIO08GPIO19GPIO810GPIO1011GPIO1112GPIO213GPIO3145V15GND16NC32GND31UART_TXD30UART_RXD29GPIO1528GPIO2327GPIO2226GPIO2125GPIO2024GPIO1923GPIO1822GPIO921GND20GPIO1319GPIO1218GND17NCGrid Pitch = 2.54mm (IEEE-315)-20.3-15.2-10.2-5.105.110.215.220.325.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132E=23.86mm · Pitch e=0.50mmD=39.10mm-23-21-19-17-15-13-11-9-7-5-3-11357911131517192123302826242220181614121086420-2-4-6-8-10-12-14-16-18-20-22-24-26-28-30mm
3. 3D CAD MODEL
Package Body: 23.86mm × 39.10mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (32/32)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
13V3PowerPower Supply Input (3V3 — 3.3V VDD3P3 (3.0V ~ 3.6V))
2RSTI/OMultiplexed I/O & Peripheral Pin RST (General)
3GPIO4I/OMultiplexed I/O & Peripheral Pin GPIO4 (General)
4GPIO5I/OMultiplexed I/O & Peripheral Pin GPIO5 (General)
5GPIO6I/OMultiplexed I/O & Peripheral Pin GPIO6 (General)
6GPIO7I/OMultiplexed I/O & Peripheral Pin GPIO7 (General)
7GPIO0I/OMultiplexed I/O & Peripheral Pin GPIO0 (General)
8GPIO1I/OMultiplexed I/O & Peripheral Pin GPIO1 (General)
9GPIO8I/OMultiplexed I/O & Peripheral Pin GPIO8 (General)
10GPIO10I/OMultiplexed I/O & Peripheral Pin GPIO10 (General)
11GPIO11I/OMultiplexed I/O & Peripheral Pin GPIO11 (General)
12GPIO2I/OMultiplexed I/O & Peripheral Pin GPIO2 (General)
13GPIO3I/OMultiplexed I/O & Peripheral Pin GPIO3 (General)
145VPowerPower Supply Input (5V — 3.3V VDD3P3 (3.0V ~ 3.6V))
15GNDGNDGround Reference Pin (GND)
16NCI/OMultiplexed I/O & Peripheral Pin NC (General)
17NCI/OMultiplexed I/O & Peripheral Pin NC (General)
18GNDGNDGround Reference Pin (GND)
19GPIO12I/OMultiplexed I/O & Peripheral Pin GPIO12 (General)
20GPIO13I/OMultiplexed I/O & Peripheral Pin GPIO13 (General)
21GNDGNDGround Reference Pin (GND)
22GPIO9I/OMultiplexed I/O & Peripheral Pin GPIO9 (General)
23GPIO18I/OMultiplexed I/O & Peripheral Pin GPIO18 (General)
24GPIO19I/OMultiplexed I/O & Peripheral Pin GPIO19 (General)
25GPIO20I/OMultiplexed I/O & Peripheral Pin GPIO20 (General)
26GPIO21I/OMultiplexed I/O & Peripheral Pin GPIO21 (General)
27GPIO22I/OMultiplexed I/O & Peripheral Pin GPIO22 (General)
28GPIO23I/OMultiplexed I/O & Peripheral Pin GPIO23 (General)
29GPIO15I/OMultiplexed I/O & Peripheral Pin GPIO15 (General)
30UART_RXDI/OMultiplexed I/O & Peripheral Pin UART_RXD (UART)
31UART_TXDI/OMultiplexed I/O & Peripheral Pin UART_TXD (UART)
32GNDGNDGround Reference Pin (GND)
PIN 1 3V3
Power
Power Supply Input (3V3 — 3.3V VDD3P3 (3.0V ~ 3.6V))
Design note: Primary positive power supply input (3V3) operating in the 3.3V VDD3P3 (3.0V ~ 3.6V) domain (Max rating: 3.6V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Live Embedded Datasheet PDF & Technical Drawing Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
Open PDF in New Window ↗Read Datasheet PDF (.pdf)
PDF VIEWEROfficial Datasheet Document: ESP32-C6-DEVKITC-1-N8 (ESPRESSIF · COMM-TH_ESP32-C6-DEVKITC-1-N8)
Scroll, search text (Ctrl+F), or expand directly inside the embedded PDF reader below
1. Realistic 3D PackageREPRESENTATIVE
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) - 2. Standard Pinout (Top View)
True package pinout (32 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) - 4. Package Dimensions (D×E×A)
COMM-TH_ESP32-C6-DEVKITC-1-N8 · 23.86×39.10mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) - 5. Recommended Land Pattern
IPC-7351B Footprint (32 Pads)Expand ›
6. Application SchematicSCHEMATIC
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for ESP32-C6
P1 · p01_fig011788×2338px
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — Espressif Systems ESP32-C6-DevKitC-1 Development Board | FEATURES | • Based on ESP32-C6-WROOM-1(U) • Integrates complete Wi-Fi, BLUETOOTH LE, Zigbee, and Thread functions • Pin header • Boot button | • Reset button • 3.3V power on LED • 5V
Espressif Systems ESP32-C6-DevKitC-1 Development Board | FEATURES | • Based on ESP32-C6-WROOM-1(U) • Integrates complete Wi-Fi, BLUETOOTH LE, Zigbee, and Thread functions • Pin header • Boot button | • Reset button • 3.3V power on LED • 5V
P1 · p01_fig02542×244px
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — Espressif Systems ESP32-C6-DevKitC-1 Development Board
Espressif Systems ESP32-C6-DevKitC-1 Development Board
P1 · p01_fig02P1
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig011410×1028px
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — BLOCK DIAGRAM
BLOCK DIAGRAM
P2 · p02_fig021271×826px
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — DIMENSIONS (MM)
DIMENSIONS (MM)
P2 · p02_fig02P2
ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)

Technical Specifications & Part Details (ESP32-C6-DEVKITC-1-N8)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Wireless Wi-Fi / Bluetooth LE SoC Module
Detailed Overview:ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) is a 32-pin wireless wi-fi / bluetooth le soc module featuring a 39.10 × 23.86 × 2.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 5V to 3.3V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Wi-Fi, Bluetooth / BLE, USB, UART, SPI interfaces.
Operating Supply VoltageV_CC / V_DD
5V to 3.3V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_TX(peak) ≈ 310 mA @ 3.3V | Deep-Sleep ≈ 10 µA | I_GPIO(max) = 40 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
39.10 × 23.86 × 2.00 mm (A1=0.10 mm)
Package family: OTHER (COMM-TH_ESP32-C6-DEVKITC-1-N8)
Pin Count & Lead PitchN / e
32 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Wi-Fi, Bluetooth / BLE, USB, UART, SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Boot Strapping Pin Alert (GPIO0): Do not force conflicting external pull-ups/pull-downs during POR reset.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol32 auto-grouped pins
OK
IPC-7351B Land Pattern32 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (COMM-TH_ESP32-C6-DEVKITC-1-N8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
39.10 × 23.86 mm
Height (A) & Pitch (e)IPC-7351B
A=3.85mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
32P / 32Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
C1, C2
BOM
22µF (or 10µF) X5R + 100nF X7R
0805 + 0402
3V3 supply decoupling for ~500mA Wi-Fi TX bursts — place closest to 3V3 pin; supply must deliver >= 600mA.
R_en + C_en
BOM
R = 10kΩ to 3V3 + C = 1µF to GND
0402 / 0603
Power-On Reset RC delay at EN (CHIP_PU) — 1µF capacitor at EN is REQUIRED for reliable cold boot.
R_boot + SW1
BOM
10kΩ Pull-up + BOOT button
0402 + SMD
Firmware boot-mode strap (IO0 on ESP32/S2/S3, IO9 on ESP32-C3) — on C3 pull IO8 high via 10kΩ for UART/USB download.
D_esd
BOM
USBLC6-2SC6 / LESD5D5.0CT1G
SOT-23-6 / SOD-523
ESD surge protection on USB D+/D- — place right next to USB Type-C connector before IO18/IO19/IO20.
ESP32-S3-MINI-1-N8 / 1U-N4R2
Espressif
100% Drop-inSame 15.4×15.4mm 65-pad footprint as ESP32-S2-MINI-2 — verify USB GPIO 19/20 pin mapping.

Technical Frequently Asked Questions (FAQ) — ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8)?

Manufactured by ESPRESSIF, the ESP32-C6-DEVKITC-1-N8 is housed in a COMM-TH_ESP32-C6-DEVKITC-1-N8 package with 32 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 5V to 3.3V. Key pins include: 1 (3V3: Power Supply Input (3V3 — 3.3V VDD3P3 (3.0V ~ 3.6V))), 2 (RST: Multiplexed I/O & Peripheral Pin RST (General)), 3 (GPIO4: Multiplexed I/O & Peripheral Pin GPIO4 (General)), 4 (GPIO5: Multiplexed I/O & Peripheral Pin GPIO5 (General)), 5 (GPIO6: Multiplexed I/O & Peripheral Pin GPIO6 (General)), 6 (GPIO7: Multiplexed I/O & Peripheral Pin GPIO7 (General)).

What are the IPC-7351B PCB Footprint dimensions for ESP32-C6-DEVKITC-1-N8?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ESP32-C6-DEVKITC-1-N8 (COMM-TH_ESP32-C6-DEVKITC-1-N8) has a nominal body envelope of 23.86 × 39.10 mm, pitch e = 0.50 mm, and 32 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ESP32-C6-DEVKITC-1-N8?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ESP32-C6-DEVKITC-1-N8 (ESPRESSIF, COMM-TH_ESP32-C6-DEVKITC-1-N8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (32 pins) & ESP32-C6 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
13V3Power_InPrimary positive power supply input (3V3) operating in the 3.3V VDD3P3 (3.0V ~ 3.6V) domain (Max rating: 3.6V).
2RSTDigital_IOSignal terminal RST (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: RST. Supported peripheral buses: General.
3GPIO4Digital_IOSignal terminal GPIO4 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO4. Supported peripheral buses: General.
4GPIO5Digital_IOSignal terminal GPIO5 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO5. Supported peripheral buses: General.
5GPIO6Digital_IOSignal terminal GPIO6 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO6. Supported peripheral buses: General.
6GPIO7Digital_IOSignal terminal GPIO7 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO7. Supported peripheral buses: General.
7GPIO0Digital_IOSignal terminal GPIO0 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO0. Supported peripheral buses: General.
8GPIO1Digital_IOSignal terminal GPIO1 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO1. Supported peripheral buses: General.
9GPIO8Digital_IOSignal terminal GPIO8 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO8. Supported peripheral buses: General.
10GPIO10Digital_IOSignal terminal GPIO10 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO10. Supported peripheral buses: General.
11GPIO11Digital_IOSignal terminal GPIO11 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO11. Supported peripheral buses: General.
12GPIO2Digital_IOSignal terminal GPIO2 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO2. Supported peripheral buses: General.
13GPIO3Digital_IOSignal terminal GPIO3 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO3. Supported peripheral buses: General.
145VPower_InPrimary positive power supply input (5V) operating in the 3.3V VDD3P3 (3.0V ~ 3.6V) domain (Max rating: 3.6V).
15GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
16NCNCSignal terminal NC (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
17NCNCSignal terminal NC (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
18GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
19GPIO12Digital_IOSignal terminal GPIO12 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO12. Supported peripheral buses: General.
20GPIO13Digital_IOSignal terminal GPIO13 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO13. Supported peripheral buses: General.
21GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
22GPIO9Digital_IOSignal terminal GPIO9 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO9. Supported peripheral buses: General.
23GPIO18Digital_IOSignal terminal GPIO18 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO18. Supported peripheral buses: General.
24GPIO19Digital_IOSignal terminal GPIO19 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO19. Supported peripheral buses: General.
25GPIO20Digital_IOSignal terminal GPIO20 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO20. Supported peripheral buses: General.
26GPIO21Digital_IOSignal terminal GPIO21 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO21. Supported peripheral buses: General.
27GPIO22Digital_IOSignal terminal GPIO22 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO22. Supported peripheral buses: General.
28GPIO23Digital_IOSignal terminal GPIO23 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO23. Supported peripheral buses: General.
29GPIO15Digital_IOSignal terminal GPIO15 (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: GPIO15. Supported peripheral buses: General.
30UART_RXDDigital_IOSignal terminal UART_RXD (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: UART_RXD. Supported peripheral buses: UART.
31UART_TXDDigital_IOSignal terminal UART_TXD (I/O, 3.3V VDD3P3 (3.0V ~ 3.6V) domain). Multiplexed alternate functions: UART_TXD. Supported peripheral buses: UART.
32GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
ExplorePartsPackagesMFRsUpload