Mechanical Dimensions & Land Pattern (MSOP-10)
Extracted from Datasheet & IPC-7351B NormalizedRecommended Companion BOM & Drop-In Equivalents
Passive external components per reference schematic and 1:1 pin-compatible alternatives| Designator / Replacement MPN | Value / Package | Function & PCB Layout Rule |
|---|---|---|
| N/A BOM | Per application circuit MSOP-10 | Size power & signal trace widths for rated load current following IPC-2221 clearance rules. |
Technical Frequently Asked Questions (FAQ) — MIC2040-2BMM-TR (MSOP-10)
Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formatsWhat is the Pinout and operating voltage specification of MIC2040-2BMM-TR (MSOP-10)?
Manufactured by MICROCHIP, the MIC2040-2BMM-TR is housed in a MSOP-10 package with 10 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 8V to 5.5V. Key pins include: 1 (EN: System Enable & Hardware Reset (EN)), 2 (/FAULT: Multiplexed I/O & Peripheral Pin /FAULT (General)), 3 (UVLOIN: Multiplexed I/O & Peripheral Pin UVLOIN (General)), 4 (GND: Ground Reference Pin (GND)), 5 (ILIM: Multiplexed I/O & Peripheral Pin ILIM (General)), 6 (VBIAS: Multiplexed I/O & Peripheral Pin VBIAS (General)).
What are the IPC-7351B PCB Footprint dimensions for MIC2040-2BMM-TR?
Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2040-2BMM-TR (MSOP-10) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 10 copper pads.
Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2040-2BMM-TR?
You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2040-2BMM-TR (MICROCHIP, MSOP-10) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.
Static Reference Appendix: Pinout Table (10 pins) & MIC2040 Family VariantsExpand static table
| Pin # | Signal Name | Electrical Type | Functional Description & Design Notes |
|---|---|---|---|
| 1 | EN | Digital_IO | Chip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset. |
| 2 | /FAULT | Open_Drain | Signal terminal /FAULT (I/O, 8V to 5.5V domain). Multiplexed alternate functions: /FAULT. Supported peripheral buses: General. |
| 3 | UVLOIN | Digital_IO | Signal terminal UVLOIN (I/O, 8V to 5.5V domain). Multiplexed alternate functions: UVLOIN. Supported peripheral buses: General. |
| 4 | GND | GND | 0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks. |
| 5 | ILIM | Digital_IO | Signal terminal ILIM (I/O, 8V to 5.5V domain). Multiplexed alternate functions: ILIM. Supported peripheral buses: General. |
| 6 | VBIAS | Digital_IO | Signal terminal VBIAS (I/O, 8V to 5.5V domain). Multiplexed alternate functions: VBIAS. Supported peripheral buses: General. |
| 7 | VIN | Power_Out | Regulated power output rail (VIN) operating in the 8V to 5.5V domain (Max rating: 8.0V). |
| 8 | VOUT | Power_Out | Regulated power output rail (VOUT) operating in the 8V to 5.5V domain (Max rating: 8.0V). |
| 9 | VIN | Power_Out | Regulated power output rail (VIN) operating in the 8V to 5.5V domain (Max rating: 8.0V). |
| 10 | VOUT | Power_Out | Regulated power output rail (VOUT) operating in the 8V to 5.5V domain (Max rating: 8.0V). |





