AT25320T1-10TC (TSSOP-14) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT25320T1-10TC

MICROCHIPTSSOP-14 · 14 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT25320T1-10TC (TSSOP-14)1CS#2SO3NC4NC5NC6WP#7GND14VCC13HOLD#12NC11NC10NC9SCK8SIGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
1234567891011121314E=4.40mm · Pitch e=0.65mmD=5.00mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.40mm × 5.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (14/14)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CS#I/OMultiplexed I/O & Peripheral Pin CS# (General)
2SOI/OMultiplexed I/O & Peripheral Pin SO (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4NCI/OMultiplexed I/O & Peripheral Pin NC (General)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6WP#I/OMultiplexed I/O & Peripheral Pin WP# (General)
7GNDGNDGround Reference Pin (GND)
8SII/OMultiplexed I/O & Peripheral Pin SI (General)
9SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
10NCI/OMultiplexed I/O & Peripheral Pin NC (General)
11NCI/OMultiplexed I/O & Peripheral Pin NC (General)
12NCI/OMultiplexed I/O & Peripheral Pin NC (General)
13HOLD#I/OMultiplexed I/O & Peripheral Pin HOLD# (General)
14VCCPowerPower Supply Input (VCC — 4.5V to 5.5V)
PIN 1 CS#
I/O
Multiplexed I/O & Peripheral Pin CS# (General)
Design note: Signal terminal CS# (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: CS#. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT25320T1-10TC (TSSOP-14) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT25320T1-10TC (TSSOP-14) - 2. Standard Pinout (Top View)
True package pinout (14 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT25320T1-10TC (TSSOP-14) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT25320T1-10TC (TSSOP-14) - 4. Package Dimensions (D×E×A)
TSSOP-14 · 4.40×5.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT25320T1-10TC (TSSOP-14) - 5. Recommended Land Pattern
IPC-7351B Footprint (14 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT25320T1-10TC (TSSOP-14) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for AT25640 / AT25080 / AT25320
P1 · p01_fig011464×918px
AT25320T1-10TC (TSSOP-14) — Note: *Pins 3, 4 and 17, 18 are internally connected for 14-lead TSSOP socket compatibility.
Note: *Pins 3, 4 and 17, 18 are internally connected for 14-lead TSSOP socket compatibility.
P1 · p01_fig01P1
AT25320T1-10TC (TSSOP-14) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig011031×686px
AT25320T1-10TC (TSSOP-14) — Block Diagram | Absolute Maximum Ratings* | Storage Temperature..................................... -65°C to +150°C | Voltage on Any Pin with Respect to Ground .....................................-1.0V to +7.0V | Maximum Operating Voltage
Block Diagram | Absolute Maximum Ratings* | Storage Temperature..................................... -65°C to +150°C | Voltage on Any Pin with Respect to Ground .....................................-1.0V to +7.0V | Maximum Operating Voltage
P2 · p02_fig021606×1201px
AT25320T1-10TC (TSSOP-14) — DC Output Current........................................................ 5.0 mA
DC Output Current........................................................ 5.0 mA
P18 · p18_fig012124×2595px
AT25320T1-10TC (TSSOP-14) — Packaging Information | 18 AT25080/160/320/640 | 0675F-08/01 | .400 (10.16) .355 (9.02) | PIN 1 | .280 (7.11) .240 (6.10) | .037 (.940) .027 (.690) .300 (7.62) REF | .210 (5.33) MAX | SEATING PLANE | .100 (2.54) BSC | .015 (.380) MIN | .022
Packaging Information | 18 AT25080/160/320/640 | 0675F-08/01 | .400 (10.16) .355 (9.02) | PIN 1 | .280 (7.11) .240 (6.10) | .037 (.940) .027 (.690) .300 (7.62) REF | .210 (5.33) MAX | SEATING PLANE | .100 (2.54) BSC | .015 (.380) MIN | .022
P18 · p18_fig01P18
AT25320T1-10TC (TSSOP-14) — Datasheet Page 18 (p18_fig01)
Datasheet Page 18 (p18_fig01)

Technical Specifications & Part Details (AT25320T1-10TC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT25320T1-10TC (TSSOP-14) is a 14-pin standard electronic & interconnect component featuring a 5.00 × 4.40 × 1.00 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 4.5V to 5.5V supply operation across -55°C to +125°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
3.0 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 4.40 × 1.00 mm (A1=0.10 mm)
Package family: TSSOP (TSSOP-14)
Pin Count & Lead PitchN / e
14 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol14 auto-grouped pins
OK
IPC-7351B Land Pattern14 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TSSOP-14)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 4.40 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.45 mm
Pins / Total PadsTopology
14P / 14Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TSSOP-14
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT25320T1-10TC (TSSOP-14)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT25320T1-10TC (TSSOP-14)?

Manufactured by MICROCHIP, the AT25320T1-10TC is housed in a TSSOP-14 package with 14 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 4.5V to 5.5V. Key pins include: 1 (CS#: Multiplexed I/O & Peripheral Pin CS# (General)), 2 (SO: Multiplexed I/O & Peripheral Pin SO (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (WP#: Multiplexed I/O & Peripheral Pin WP# (General)).

What are the IPC-7351B PCB Footprint dimensions for AT25320T1-10TC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT25320T1-10TC (TSSOP-14) has a nominal body envelope of 4.40 × 5.00 mm, pitch e = 0.65 mm, and 14 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT25320T1-10TC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT25320T1-10TC (MICROCHIP, TSSOP-14) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (14 pins) & AT25640 / AT25080 / AT25320 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CS#Digital_IOSignal terminal CS# (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: CS#. Supported peripheral buses: General.
2SODigital_IOSignal terminal SO (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
5NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6WP#Digital_IOSignal terminal WP# (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: WP#. Supported peripheral buses: General.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8SIDigital_IOSignal terminal SI (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
9SCKDigital_IOSignal terminal SCK (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
10NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
11NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
12NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
13HOLD#Digital_IOSignal terminal HOLD# (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: HOLD#. Supported peripheral buses: General.
14VCCPower_InPrimary positive power supply input (VCC) operating in the 4.5V to 5.5V domain (Max rating: 5.5V).