ChipDocs.org
⌘K
2284 PARTSUpload PDF
AT24C01-10PC (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT24C01-10PC

MICROCHIPID: C19413753PDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT24C01-10PC (PDIP-8)1NC2NC3NC4GND8VCC7TEST6SCL5SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=6.35mm · Pitch e=2.54mmD=9.62mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 6.35mm × 9.62mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4GNDGNDGround Reference Pin (GND)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7TESTI/OMultiplexed I/O & Peripheral Pin TEST (General)
8VCCPowerPower Supply Input (VCC — 4.5V to 5.5V)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: Signal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Live Embedded Datasheet PDF & Technical Drawing Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
Open PDF in New Window ↗Read Datasheet PDF (.pdf)
PDF VIEWEROfficial Datasheet Document: AT24C01-10PC (MICROCHIP · PDIP-8)
Scroll, search text (Ctrl+F), or expand directly inside the embedded PDF reader below
1. Realistic 3D PackageREPRESENTATIVE
AT24C01-10PC (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT24C01-10PC (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT24C01-10PC (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT24C01-10PC (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 6.35×9.62mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT24C01-10PC (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT24C01-10PC (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for AT24C01
P1 · p01_fig02EXACT PACKAGE
AT24C01-10PC (PDIP-8) — 8-Pin PDIP
8-Pin PDIP
P1 · p01_fig01652×503px
AT24C01-10PC (PDIP-8) — 1K (128 x 8)
1K (128 x 8)
P1 · p01_fig02P1
AT24C01-10PC (PDIP-8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig011783×2012px
AT24C01-10PC (PDIP-8) — Block Diagram | Pin Description | Memory Organization | AT24C01, 1K SERIAL EEPROM: Internally organized with 128 pages of 1 byte each. The 1K requires a 7-bit data word address for random word addressing. | Absolute Maximum Ratings* | Stora
Block Diagram | Pin Description | Memory Organization | AT24C01, 1K SERIAL EEPROM: Internally organized with 128 pages of 1 byte each. The 1K requires a 7-bit data word address for random word addressing. | Absolute Maximum Ratings* | Stora
P10 · p10_fig012040×2566px
AT24C01-10PC (PDIP-8) — AT24C01 10 | Packaging Information | 0.23 (0.009) 0.13 (0.005) | 1.10 (0.043) 0.97 (0.038) | 0.15 (0.006) 0.05 (0.002) | 0.40 (0.016) 0.25 (0.010) | 3.10 (0.122) 2.90 (0.114) | 3.10 (0.122) 2.90 (0.114) | PIN 1 | 0.65 (0.026) TYP | 4.90 (0.
AT24C01 10 | Packaging Information | 0.23 (0.009) 0.13 (0.005) | 1.10 (0.043) 0.97 (0.038) | 0.15 (0.006) 0.05 (0.002) | 0.40 (0.016) 0.25 (0.010) | 3.10 (0.122) 2.90 (0.114) | 3.10 (0.122) 2.90 (0.114) | PIN 1 | 0.65 (0.026) TYP | 4.90 (0.
P10 · p10_fig01P10
AT24C01-10PC (PDIP-8) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)

Technical Specifications & Part Details (AT24C01-10PC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT24C01-10PC (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 9.62 × 6.35 × 4.20 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 4.5V to 5.5V supply operation across -55°C to +125°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.62 × 6.35 × 4.20 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — AT24C01 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.62 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.20mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT24C01-10PC (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT24C01-10PC (PDIP-8)?

Manufactured by MICROCHIP, the AT24C01-10PC is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 4.5V to 5.5V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for AT24C01-10PC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT24C01-10PC (PDIP-8) has a nominal body envelope of 6.35 × 9.62 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT24C01-10PC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT24C01-10PC (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & AT24C01 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7TESTDigital_IOSignal terminal TEST (I/O, 4.5V to 5.5V domain). Multiplexed alternate functions: TEST. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 4.5V to 5.5V domain (Max rating: 5.5V).
ExplorePartsPackagesMFRsUpload