SY89834UMI (MLF-16(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY89834UMI

MICROCHIPMLF-16(3x3) · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY89834UMI (MLF-16(3x3))1Q12#Q13Q24#Q25Q36#Q37VCC8EN9IN217EP16#Q015Q014VCC13GND12IN111SEL10NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234910111256781314151617E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1Q1I/OMultiplexed I/O & Peripheral Pin Q1 (General)
2#Q1I/OMultiplexed I/O & Peripheral Pin #Q1 (General)
3Q2I/OMultiplexed I/O & Peripheral Pin Q2 (General)
4#Q2I/OMultiplexed I/O & Peripheral Pin #Q2 (General)
5Q3I/OMultiplexed I/O & Peripheral Pin Q3 (General)
6#Q3I/OMultiplexed I/O & Peripheral Pin #Q3 (General)
7VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
8ENISystem Enable & Hardware Reset (EN)
9IN2I/OMultiplexed I/O & Peripheral Pin IN2 (General)
10NCI/OMultiplexed I/O & Peripheral Pin NC (General)
11SELI/OMultiplexed I/O & Peripheral Pin SEL (General)
12IN1I/OMultiplexed I/O & Peripheral Pin IN1 (General)
13GNDGNDGround Reference Pin (GND)
14VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
15Q0I/OMultiplexed I/O & Peripheral Pin Q0 (General)
16#Q0I/OMultiplexed I/O & Peripheral Pin #Q0 (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 Q1
I/O
Multiplexed I/O & Peripheral Pin Q1 (General)
Design note: Signal terminal Q1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY89834UMI (MLF-16(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY89834UMI (MLF-16(3x3)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY89834UMI (MLF-16(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY89834UMI (MLF-16(3x3)) - 4. Package Dimensions (D×E×A)
MLF-16(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY89834UMI (MLF-16(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY89834UMI (MLF-16(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for SY89834
P10 · p10_fig01EXACT PACKAGE
SY89834UMI (MLF-16(3x3)) — 10 | Precision Edge® SY89834U Micrel, Inc. | M9999-080505 hbwhelp@micrel.com or (408) 955-1690 | 16 LEAD EPAD MicroLeadFrame™ (MLF-16) | Package | EP- Exposed Pad | Die | CompSide Island | Heat Dissipation | Heavy Copper Plane | Heavy Coppe
10 | Precision Edge® SY89834U Micrel, Inc. | M9999-080505 [email protected] or (408) 955-1690 | 16 LEAD EPAD MicroLeadFrame™ (MLF-16) | Package | EP- Exposed Pad | Die | CompSide Island | Heat Dissipation | Heavy Copper Plane | Heavy Coppe
P1 · p01_fig011015×864px
SY89834UMI (MLF-16(3x3)) — FUNCTIONAL BLOCK DIAGRAM
FUNCTIONAL BLOCK DIAGRAM
P8 · p08_fig012040×2707px
SY89834UMI (MLF-16(3x3)) — Figure 3. Simplified TTL/CMOS Input Buffer
Figure 3. Simplified TTL/CMOS Input Buffer
P9 · p09_fig01950×547px
SY89834UMI (MLF-16(3x3)) — Figure 4c. Terminating Unused LVPECL I/O
Figure 4c. Terminating Unused LVPECL I/O
P9 · p09_fig01P9
SY89834UMI (MLF-16(3x3)) — Datasheet Page 9 (p09_fig01)
Datasheet Page 9 (p09_fig01)
P10 · p10_fig01P10
SY89834UMI (MLF-16(3x3)) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)

Technical Specifications & Part Details (SY89834UMI)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY89834UMI (MLF-16(3x3)) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1.0GHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.00 mm (A1=0.02 mm)
Package family: OTHER (MLF-16(3x3))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.60×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MLF-16(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.65 mm
Pins / Total PadsTopology
17P / 17Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MLF-16(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY89834UMI (MLF-16(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY89834UMI (MLF-16(3x3))?

Manufactured by MICROCHIP, the SY89834UMI is housed in a MLF-16(3x3) package with 17 pins and a 0.50 mm lead pitch. Key pins include: 1 (Q1: Multiplexed I/O & Peripheral Pin Q1 (General)), 2 (#Q1: Multiplexed I/O & Peripheral Pin #Q1 (General)), 3 (Q2: Multiplexed I/O & Peripheral Pin Q2 (General)), 4 (#Q2: Multiplexed I/O & Peripheral Pin #Q2 (General)), 5 (Q3: Multiplexed I/O & Peripheral Pin Q3 (General)), 6 (#Q3: Multiplexed I/O & Peripheral Pin #Q3 (General)).

What are the IPC-7351B PCB Footprint dimensions for SY89834UMI?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY89834UMI (MLF-16(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.60 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY89834UMI?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY89834UMI (MICROCHIP, MLF-16(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & SY89834 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1Q1Digital_IOSignal terminal Q1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
2#Q1Digital_IOSignal terminal #Q1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: #Q1. Supported peripheral buses: General.
3Q2Digital_IOSignal terminal Q2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q2. Supported peripheral buses: General.
4#Q2Digital_IOSignal terminal #Q2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: #Q2. Supported peripheral buses: General.
5Q3Digital_IOSignal terminal Q3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q3. Supported peripheral buses: General.
6#Q3Digital_IOSignal terminal #Q3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: #Q3. Supported peripheral buses: General.
7VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
8ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
9IN2Digital_IOSignal terminal IN2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN2. Supported peripheral buses: General.
10NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
11SELDigital_IOSignal terminal SEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SEL. Supported peripheral buses: General.
12IN1Digital_IOSignal terminal IN1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN1. Supported peripheral buses: General.
13GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
14VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
15Q0Digital_IOSignal terminal Q0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
16#Q0Digital_IOSignal terminal #Q0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: #Q0. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.