AT24C01A-10TU-2.7-T (TSSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT24C01A-10TU-2.7-T

MICROCHIPTSSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT24C01A-10TU-2.7-T (TSSOP-8)1A02A13A24GND8VCC7WP6SCL5SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=4.40mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 4.40mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1A0I/OMultiplexed I/O & Peripheral Pin A0 (General)
2A1I/OMultiplexed I/O & Peripheral Pin A1 (General)
3A2I/OMultiplexed I/O & Peripheral Pin A2 (General)
4GNDGNDGround Reference Pin (GND)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7WPI/OMultiplexed I/O & Peripheral Pin WP (General)
8VCCPowerPower Supply Input (VCC — 2.7V to 5.5V)
PIN 1 A0
I/O
Multiplexed I/O & Peripheral Pin A0 (General)
Design note: Signal terminal A0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A0. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT24C01A-10TU-2.7-T (TSSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT24C01A-10TU-2.7-T (TSSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT24C01A-10TU-2.7-T (TSSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT24C01A-10TU-2.7-T (TSSOP-8) - 4. Package Dimensions (D×E×A)
TSSOP-8 · 3.00×4.40mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT24C01A-10TU-2.7-T (TSSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT24C01A-10TU-2.7-T (TSSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for AT24C16N / AT24C01A / AT24C04
P1 · p01_fig01652×503px
AT24C01A-10TU-2.7-T (TSSOP-8) — 1K (128 x 8)
1K (128 x 8)
P1 · p01_fig021478×965px
AT24C01A-10TU-2.7-T (TSSOP-8) — Table 1. Pin Configuration | Pin Name Function | A0 - A2 Address Inputs | SDA Serial Data | SCL Serial Clock Input | WP Write Protect | NC No Connect | GND Ground | VCC Power Supply | AT24C04 AT24C08A AT24C16A(3) | Notes: 1. Not Recommended
Table 1. Pin Configuration | Pin Name Function | A0 - A2 Address Inputs | SDA Serial Data | SCL Serial Clock Input | WP Write Protect | NC No Connect | GND Ground | VCC Power Supply | AT24C04 AT24C08A AT24C16A(3) | Notes: 1. Not Recommended
P2 · p02_fig011523×1286px
AT24C01A-10TU-2.7-T (TSSOP-8) — Figure 1. Block Diagram
Figure 1. Block Diagram
P20 · p20_fig012124×2600px
AT24C01A-10TU-2.7-T (TSSOP-8) — 20 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8A2 - TSSOP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. | 5/30/02 | COMMON DIMENSIONS (Unit of Measure = mm) | SYMBOL MIN NOM MAX NOTE | D 2.90 3.00 3.10 2, 5 | E
20 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8A2 - TSSOP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. | 5/30/02 | COMMON DIMENSIONS (Unit of Measure = mm) | SYMBOL MIN NOM MAX NOTE | D 2.90 3.00 3.10 2, 5 | E
P20 · p20_fig01P20
AT24C01A-10TU-2.7-T (TSSOP-8) — Datasheet Page 20 (p20_fig01)
Datasheet Page 20 (p20_fig01)
P21 · p21_fig012124×2773px
AT24C01A-10TU-2.7-T (TSSOP-8) — 21 | AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8Y1 - MAP | A - - 0.90 | A1 0.00 - 0.05 | D 4.70 4.90 5.10 | E 2.80 3.00 3.20 | D1 0.85 1.00 1.15 | E1 0.85 1.00 1.15 | b 0.25 0.30 0.35 | e 0.65 TYP | L 0.50 0.60 0.70 | PIN 1 INDEX AREA |
21 | AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8Y1 - MAP | A - - 0.90 | A1 0.00 - 0.05 | D 4.70 4.90 5.10 | E 2.80 3.00 3.20 | D1 0.85 1.00 1.15 | E1 0.85 1.00 1.15 | b 0.25 0.30 0.35 | e 0.65 TYP | L 0.50 0.60 0.70 | PIN 1 INDEX AREA |
P22 · p22_fig012124×2612px
AT24C01A-10TU-2.7-T (TSSOP-8) — 22 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8Y6 - Mini-MAP (MLP 2x3 mm) | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 8Y6, 8-lead 2.0 x 3.0 mm Body, 0.50 mm Pitch, Utlra Thin Mini-Map, Dual No Lead Package (DF
22 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8Y6 - Mini-MAP (MLP 2x3 mm) | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 8Y6, 8-lead 2.0 x 3.0 mm Body, 0.50 mm Pitch, Utlra Thin Mini-Map, Dual No Lead Package (DF

Technical Specifications & Part Details (AT24C01A-10TU-2.7-T)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT24C01A-10TU-2.7-T (TSSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 4.40 × 1.20 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.7V to 5.5V supply operation across 55°C to +125°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
55°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 4.40 × 1.20 mm (A1=0.10 mm)
Package family: TSSOP (TSSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TSSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 4.40 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 1.30 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TSSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT24C01A-10TU-2.7-T (TSSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT24C01A-10TU-2.7-T (TSSOP-8)?

Manufactured by MICROCHIP, the AT24C01A-10TU-2.7-T is housed in a TSSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (A0: Multiplexed I/O & Peripheral Pin A0 (General)), 2 (A1: Multiplexed I/O & Peripheral Pin A1 (General)), 3 (A2: Multiplexed I/O & Peripheral Pin A2 (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for AT24C01A-10TU-2.7-T?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT24C01A-10TU-2.7-T (TSSOP-8) has a nominal body envelope of 4.40 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT24C01A-10TU-2.7-T?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT24C01A-10TU-2.7-T (MICROCHIP, TSSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & AT24C16N / AT24C01A / AT24C04 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1A0Digital_IOSignal terminal A0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A0. Supported peripheral buses: General.
2A1Digital_IOSignal terminal A1 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A1. Supported peripheral buses: General.
3A2Digital_IOSignal terminal A2 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A2. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7WPDigital_IOSignal terminal WP (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).