AT89LP51RC2-20AU (TQFP-44(10x10)) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT89LP51RC2-20AU

MICROCHIPTQFP-44(10x10) · 44 Pins · Pitch 0.80mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT89LP51RC2-20AU (TQFP-44(10x10))1P4.22P1.03P1.14P1.25P1.36P1.47(TXD)P3.18(INT0#)P3.29(INT1#)P3.310(T0)P3.411(T1)P3.512(WR#)P3.613(RD#)P3.714(XTAL2A)P4.715(XTAL1A)P4.616VSS17(DDA)P4.318(A8)P2.019(A9)P2.120(DAC-/A10)P221(DAC+/A11)P222GND44VDD43P0.042P0.141P0.240P0.339P0.438P0.537P0.636P0.735POL34P4.033P4.432P4.531P2.730P2.629P2.528P2.427P2.326P2.125P2.124P2.023P4.3Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.833.027.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9-33.0mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132333435363738394041424344E=10.00mm · Pitch e=0.80mmD=10.00mm-10-8-6-4-202468101086420-2-4-6-8-10mm
3. 3D CAD MODEL
Package Body: 10.00mm × 10.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (44/44)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1P4.2I/OMultiplexed I/O & Peripheral Pin P4.2 (RTC/CLK)
2P1.0I/OMultiplexed I/O & Peripheral Pin P1.0 (RTC/CLK)
3P1.1I/OMultiplexed I/O & Peripheral Pin P1.1 (SPI)
4P1.2I/OMultiplexed I/O & Peripheral Pin P1.2 (General)
5P1.3I/OMultiplexed I/O & Peripheral Pin P1.3 (General)
6P1.4I/OMultiplexed I/O & Peripheral Pin P1.4 (SPI)
7(TXD)P3.1I/OMultiplexed I/O & Peripheral Pin (TXD)P3.1 (UART)
8(INT0#)P3.2I/OMultiplexed I/O & Peripheral Pin (INT0#)P3.2 (General)
9(INT1#)P3.3I/OMultiplexed I/O & Peripheral Pin (INT1#)P3.3 (General)
10(T0)P3.4I/OMultiplexed I/O & Peripheral Pin (T0)P3.4 (General)
11(T1)P3.5I/OMultiplexed I/O & Peripheral Pin (T1)P3.5 (General)
12(WR#)P3.6I/OMultiplexed I/O & Peripheral Pin (WR#)P3.6 (General)
13(RD#)P3.7I/OMultiplexed I/O & Peripheral Pin (RD#)P3.7 (General)
14(XTAL2A)P4.7I/OMultiplexed I/O & Peripheral Pin (XTAL2A)P4.7 (RTC/CLK)
15(XTAL1A)P4.6I/OMultiplexed I/O & Peripheral Pin (XTAL1A)P4.6 (RTC/CLK)
16VSSGNDGround Reference Pin (VSS)
17(DDA)P4.3I/OMultiplexed I/O & Peripheral Pin (DDA)P4.3 (General)
18(A8)P2.0I/OMultiplexed I/O & Peripheral Pin (A8)P2.0 (General)
19(A9)P2.1I/OMultiplexed I/O & Peripheral Pin (A9)P2.1 (General)
20(DAC-/A10)P2.2I/OMultiplexed I/O & Peripheral Pin (DAC-/A10)P2.2 (DAC)
21(DAC+/A11)P2.3I/OMultiplexed I/O & Peripheral Pin (DAC+/A11)P2.3 (DAC)
22GNDGNDGround Reference Pin (GND)
23P4.3I/OMultiplexed I/O & Peripheral Pin P4.3 (General)
24P2.0I/OMultiplexed I/O & Peripheral Pin P2.0 (General)
25P2.1I/OMultiplexed I/O & Peripheral Pin P2.1 (General)
26P2.1I/OMultiplexed I/O & Peripheral Pin P2.1 (DAC)
27P2.3I/OMultiplexed I/O & Peripheral Pin P2.3 (DAC)
28P2.4I/OMultiplexed I/O & Peripheral Pin P2.4 (ADC)
29P2.5I/OMultiplexed I/O & Peripheral Pin P2.5 (ADC)
30P2.6I/OMultiplexed I/O & Peripheral Pin P2.6 (ADC)
31P2.7I/OMultiplexed I/O & Peripheral Pin P2.7 (ADC)
32P4.5I/OMultiplexed I/O & Peripheral Pin P4.5 (General)
33P4.4I/OMultiplexed I/O & Peripheral Pin P4.4 (General)
34P4.0I/OMultiplexed I/O & Peripheral Pin P4.0 (I2C)
35POLI/OMultiplexed I/O & Peripheral Pin POL (General)
36P0.7I/OMultiplexed I/O & Peripheral Pin P0.7 (General)
37P0.6I/OMultiplexed I/O & Peripheral Pin P0.6 (ADC)
38P0.5I/OMultiplexed I/O & Peripheral Pin P0.5 (ADC)
39P0.4I/OMultiplexed I/O & Peripheral Pin P0.4 (ADC)
40P0.3I/OMultiplexed I/O & Peripheral Pin P0.3 (ADC)
41P0.2I/OMultiplexed I/O & Peripheral Pin P0.2 (ADC)
42P0.1I/OMultiplexed I/O & Peripheral Pin P0.1 (ADC)
43P0.0I/OMultiplexed I/O & Peripheral Pin P0.0 (ADC)
44VDDPowerPower Supply Input (VDD — 2.4V to 5.5V)
PIN 1 P4.2
I/O
Multiplexed I/O & Peripheral Pin P4.2 (RTC/CLK)
Design note: P4.2: User-configurable I/O Port 4bit 2. XTAL2B: Output from low-frequency inverting oscillator amplifier B (AT89LP51IC2 only). It may be used as a port pin if the internal RC oscillator or external clock is selected as the clock source B.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT89LP51RC2-20AU (TQFP-44(10x10)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT89LP51RC2-20AU (TQFP-44(10x10)) - 2. Standard Pinout (Top View)
True package pinout (44 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT89LP51RC2-20AU (TQFP-44(10x10)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT89LP51RC2-20AU (TQFP-44(10x10)) - 4. Package Dimensions (D×E×A)
TQFP-44(10x10) · 10.00×10.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT89LP51RC2-20AU (TQFP-44(10x10)) - 5. Recommended Land Pattern
IPC-7351B Footprint (44 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT89LP51RC2-20AU (TQFP-44(10x10)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for AT89LP51RC2
P20 · p20_fig01EXACT PACKAGE
AT89LP51RC2-20AU (TQFP-44(10x10)) — 20 | 3722AS-MICRO-10/11 AT89LP51RB2/RC2/IC2 Summary | 5. Packaging Information | 5.1 44AA - VQFP/LQFP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. | 44AA, 44-lead, 10 x 10 mm Body Size, 1.4 mm Body Thickness, 0.8
20 | 3722AS-MICRO-10/11 AT89LP51RB2/RC2/IC2 Summary | 5. Packaging Information | 5.1 44AA - VQFP/LQFP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. | 44AA, 44-lead, 10 x 10 mm Body Size, 1.4 mm Body Thickness, 0.8
P1 · p01_fig01652×376px
AT89LP51RC2-20AU (TQFP-44(10x10)) — 8-bit Flash Microcontroller with 24KB/32KB Program Memory
8-bit Flash Microcontroller with 24KB/32KB Program Memory
P2 · p02_fig01970×911px
AT89LP51RC2-20AU (TQFP-44(10x10)) — 1. Pin Configurations
1. Pin Configurations
P2 · p02_fig03967×903px
AT89LP51RC2-20AU (TQFP-44(10x10)) — 1.2 44-lead PLCC
1.2 44-lead PLCC
P2 · p02_fig03P2
AT89LP51RC2-20AU (TQFP-44(10x10)) — Datasheet Page 2 (p02_fig03)
Datasheet Page 2 (p02_fig03)
P20 · p20_fig01P20
AT89LP51RC2-20AU (TQFP-44(10x10)) — Datasheet Page 20 (p20_fig01)
Datasheet Page 20 (p20_fig01)
P21 · p21_fig012050×2301px
AT89LP51RC2-20AU (TQFP-44(10x10)) — 21 | 3722AS-MICRO-10/11 | 0°~7° | L | C | A1 A2 A | D | E b | BOTTOM VIEW | SIDE VIEW | TOP VIEW | E1 | D1 | e | COMMON DIMENSIONS (Unit of Measure = mm) | SYMBOL MIN NOM MAX NOTE | A - - 1.20 | A1 0.05 - 0.15 | A2 0.95 1.00 1.05 | D 11.75
21 | 3722AS-MICRO-10/11 | 0°~7° | L | C | A1 A2 A | D | E b | BOTTOM VIEW | SIDE VIEW | TOP VIEW | E1 | D1 | e | COMMON DIMENSIONS (Unit of Measure = mm) | SYMBOL MIN NOM MAX NOTE | A - - 1.20 | A1 0.05 - 0.15 | A2 0.95 1.00 1.05 | D 11.75
P22 · p22_fig012124×2747px
AT89LP51RC2-20AU (TQFP-44(10x10)) — 22 | 3722AS-MICRO-10/11 AT89LP51RB2/RC2/IC2 Summary | 5.3 44J - PLCC | A 4.191 - 4.572 | A1 2.286 - 3.048 | A2 0.508 - - | D 17.399 - 17.653 | D1 16.510 - 16.662 Note 2 | E 17.399 - 17.653 | E1 16.510 - 16.662 Note 2 | D2/E2 14.986 - 16.002
22 | 3722AS-MICRO-10/11 AT89LP51RB2/RC2/IC2 Summary | 5.3 44J - PLCC | A 4.191 - 4.572 | A1 2.286 - 3.048 | A2 0.508 - - | D 17.399 - 17.653 | D1 16.510 - 16.662 Note 2 | E 17.399 - 17.653 | E1 16.510 - 16.662 Note 2 | D2/E2 14.986 - 16.002
P2 · p02_fig02All Packages in PDF
AT89LP51RC2-20AU (TQFP-44(10x10)) — 1.3 44-pad VQFN/QFN/MLF
1.3 44-pad VQFN/QFN/MLF
P2 · p02_fig04All Packages in PDF
AT89LP51RC2-20AU (TQFP-44(10x10)) — 1.4 40-pin PDIP
1.4 40-pin PDIP

Technical Specifications & Part Details (AT89LP51RC2-20AU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT89LP51RC2-20AU (TQFP-44(10x10)) is a 44-pin standard electronic & interconnect component featuring a 10.00 × 10.00 × 1.20 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 2.4V to 5.5V supply operation across -40° C to 85°C with integrated UART, SPI, I2C, ADC, DAC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.4V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40° C to 85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.00 × 10.00 × 1.20 mm (A1=0.10 mm)
Package family: TQFP (TQFP-44(10x10))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol44 auto-grouped pins
OK
IPC-7351B Land Pattern44 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TQFP-44(10x10))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.00 × 10.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.80mm
Pad Size (W × L)Level B
0.50 × 1.50 mm
Pins / Total PadsTopology
44P / 44Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-44(10x10)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT89LP51RC2-20AU (TQFP-44(10x10))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT89LP51RC2-20AU (TQFP-44(10x10))?

Manufactured by MICROCHIP, the AT89LP51RC2-20AU is housed in a TQFP-44(10x10) package with 44 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 2.4V to 5.5V. Key pins include: 1 (P4.2: Multiplexed I/O & Peripheral Pin P4.2 (RTC/CLK)), 2 (P1.0: Multiplexed I/O & Peripheral Pin P1.0 (RTC/CLK)), 3 (P1.1: Multiplexed I/O & Peripheral Pin P1.1 (SPI)), 4 (P1.2: Multiplexed I/O & Peripheral Pin P1.2 (General)), 5 (P1.3: Multiplexed I/O & Peripheral Pin P1.3 (General)), 6 (P1.4: Multiplexed I/O & Peripheral Pin P1.4 (SPI)).

What are the IPC-7351B PCB Footprint dimensions for AT89LP51RC2-20AU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT89LP51RC2-20AU (TQFP-44(10x10)) has a nominal body envelope of 10.00 × 10.00 mm, pitch e = 0.80 mm, and 44 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT89LP51RC2-20AU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT89LP51RC2-20AU (MICROCHIP, TQFP-44(10x10)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (44 pins) & AT89LP51RC2 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1P4.2Digital_IOSignal terminal P4.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P4.2. Supported peripheral buses: RTC/CLK.
2P1.0Digital_IOSignal terminal P1.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.0. Supported peripheral buses: RTC/CLK.
3P1.1Digital_IOSignal terminal P1.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: SPI_SLAVE. Supported peripheral buses: SPI.
4P1.2Digital_IOSignal terminal P1.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.2. Supported peripheral buses: General.
5P1.3Digital_IOSignal terminal P1.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.3. Supported peripheral buses: General.
6P1.4Digital_IOSignal terminal P1.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: SPI_SLAVE. Supported peripheral buses: SPI.
7(TXD)P3.1Digital_IOSignal terminal (TXD)P3.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (TXD)P3.1. Supported peripheral buses: UART.
8(INT0#)P3.2Digital_IOSignal terminal (INT0#)P3.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (INT0#)P3.2. Supported peripheral buses: General.
9(INT1#)P3.3Digital_IOSignal terminal (INT1#)P3.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (INT1#)P3.3. Supported peripheral buses: General.
10(T0)P3.4Digital_IOSignal terminal (T0)P3.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (T0)P3.4. Supported peripheral buses: General.
11(T1)P3.5Digital_IOSignal terminal (T1)P3.5 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (T1)P3.5. Supported peripheral buses: General.
12(WR#)P3.6Digital_IOSignal terminal (WR#)P3.6 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (WR#)P3.6. Supported peripheral buses: General.
13(RD#)P3.7Digital_IOSignal terminal (RD#)P3.7 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (RD#)P3.7. Supported peripheral buses: General.
14(XTAL2A)P4.7Digital_IOSignal terminal (XTAL2A)P4.7 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (XTAL2A)P4.7. Supported peripheral buses: RTC/CLK.
15(XTAL1A)P4.6Digital_IOSignal terminal (XTAL1A)P4.6 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (XTAL1A)P4.6. Supported peripheral buses: RTC/CLK.
16VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
17(DDA)P4.3Digital_IOSignal terminal (DDA)P4.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (DDA)P4.3. Supported peripheral buses: General.
18(A8)P2.0Digital_IOSignal terminal (A8)P2.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (A8)P2.0. Supported peripheral buses: General.
19(A9)P2.1Digital_IOSignal terminal (A9)P2.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (A9)P2.1. Supported peripheral buses: General.
20(DAC-/A10)P2.2AnalogSignal terminal (DAC-/A10)P2.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (DAC-/A10)P2.2. Supported peripheral buses: DAC.
21(DAC+/A11)P2.3AnalogSignal terminal (DAC+/A11)P2.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: (DAC+/A11)P2.3. Supported peripheral buses: DAC.
22GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
23P4.3Digital_IOSignal terminal P4.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P4.3. Supported peripheral buses: General.
24P2.0Digital_IOSignal terminal P2.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.0. Supported peripheral buses: General.
25P2.1Digital_IOSignal terminal P2.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.1. Supported peripheral buses: General.
26P2.1Digital_IOSignal terminal P2.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.1. Supported peripheral buses: DAC.
27P2.3Digital_IOSignal terminal P2.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.3. Supported peripheral buses: DAC.
28P2.4Digital_IOSignal terminal P2.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.4. Supported peripheral buses: ADC.
29P2.5Digital_IOSignal terminal P2.5 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.5. Supported peripheral buses: ADC.
30P2.6Digital_IOSignal terminal P2.6 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.6. Supported peripheral buses: ADC.
31P2.7Digital_IOSignal terminal P2.7 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P2.7. Supported peripheral buses: ADC.
32P4.5Digital_IOSignal terminal P4.5 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P4.5. Supported peripheral buses: General.
33P4.4Digital_IOSignal terminal P4.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P4.4. Supported peripheral buses: General.
34P4.0Digital_IOSignal terminal P4.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P4.0. Supported peripheral buses: I2C.
35POLDigital_IOSignal terminal POL (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: POL. Supported peripheral buses: General.
36P0.7Digital_IOSignal terminal P0.7 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.7. Supported peripheral buses: General.
37P0.6Digital_IOSignal terminal P0.6 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.6. Supported peripheral buses: ADC.
38P0.5Digital_IOSignal terminal P0.5 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.5. Supported peripheral buses: ADC.
39P0.4Digital_IOSignal terminal P0.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.4. Supported peripheral buses: ADC.
40P0.3Digital_IOSignal terminal P0.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.3. Supported peripheral buses: ADC.
41P0.2Digital_IOSignal terminal P0.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.2. Supported peripheral buses: ADC.
42P0.1Digital_IOSignal terminal P0.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.1. Supported peripheral buses: ADC.
43P0.0Digital_IOSignal terminal P0.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P0.0. Supported peripheral buses: ADC.
44VDDPower_InPrimary positive power supply input (VDD) operating in the 2.4V to 5.5V domain (Max rating: 5.5V).