93AA76T/SN (SOIC-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

93AA76T/SN

MICROCHIPSOIC-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 93AA76T/SN (SOIC-8)1NC2A13A24GND8VCC7WP6SCL5SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2A1I/OMultiplexed I/O & Peripheral Pin A1 (General)
3A2I/OMultiplexed I/O & Peripheral Pin A2 (General)
4GNDGNDGround Reference Pin (GND)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7WPI/OMultiplexed I/O & Peripheral Pin WP (General)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: Signal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
93AA76T/SN (SOIC-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
93AA76T/SN (SOIC-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
93AA76T/SN (SOIC-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
93AA76T/SN (SOIC-8) - 4. Package Dimensions (D×E×A)
SOIC-8 · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
93AA76T/SN (SOIC-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
93AA76T/SN (SOIC-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for 93AA76T/SN / 93AA86T/SN
P12 · p12_fig01EXACT PACKAGE
93AA76T/SN (SOIC-8) — 5.1 Package Marking Information
5.1 Package Marking Information
P1 · p01_fig02733×954px
93AA76T/SN (SOIC-8) — 2 3 4
2 3 4
P11 · p11_fig011474×801px
93AA76T/SN (SOIC-8) — 4.4 Data Out (DO)
4.4 Data Out (DO)
P11 · p11_fig01P11
93AA76T/SN (SOIC-8) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P12 · p12_fig02341×626px
93AA76T/SN (SOIC-8) — 017 | Example | 93AA76 | 0410 | Example | 93AA86 /SN0410 017
017 | Example | 93AA76 | 0410 | Example | 93AA86 /SN0410 017
P12 · p12_fig031131×521px
93AA76T/SN (SOIC-8) — DS21130F-page 12  1996-2012 Microchip Technology Inc.
DS21130F-page 12  1996-2012 Microchip Technology Inc.
P12 · p12_fig01P12
93AA76T/SN (SOIC-8) — Datasheet Page 12 (p12_fig01)
Datasheet Page 12 (p12_fig01)
P14 · p14_fig011150×837px
93AA76T/SN (SOIC-8) — 2 | 1 | D | n | p | B | E | E1 | h | L  | c | 45 |  | A2 |  | A | A1 | Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
2 | 1 | D | n | p | B | E | E1 | h | L  | c | 45 |  | A2 |  | A | A1 | Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
P14 · p14_fig021198×630px
93AA76T/SN (SOIC-8) — L 
L 
P1 · p01_fig01All Packages in PDF
93AA76T/SN (SOIC-8) — Counter Address
Counter Address

Technical Specifications & Part Details (93AA76T/SN)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:93AA76T/SN (SOIC-8) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.75 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -65°C to +150°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.75 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — 93AA76T/SN / 93AA86T/SN (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOIC-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.75mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 93AA76T/SN (SOIC-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 93AA76T/SN (SOIC-8)?

Manufactured by MICROCHIP, the 93AA76T/SN is housed in a SOIC-8 package with 8 pins and a 1.27 mm lead pitch. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (A1: Multiplexed I/O & Peripheral Pin A1 (General)), 3 (A2: Multiplexed I/O & Peripheral Pin A2 (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for 93AA76T/SN?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 93AA76T/SN (SOIC-8) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 93AA76T/SN?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 93AA76T/SN (MICROCHIP, SOIC-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & 93AA76T/SN / 93AA86T/SN Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2A1Digital_IOSignal terminal A1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A1. Supported peripheral buses: General.
3A2Digital_IOSignal terminal A2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A2. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7WPDigital_IOSignal terminal WP (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).